Intersleek 1001 Elastic Foul-release Coating is an antifouling paint. Used as the topcoat in the Intersleek 1000 coating system. A three-component foul-release coating. Parameters on this page: volume solids 72% ± 2%, dry film thickness 150 µm, theoretical spreading rate 4.8 m²/L. Comparable products of the same brand: Intercept 7000 Linear Polishing Antifouling Paint, Intercept 8500 LPP Tin-free Linear Polishing Polymer Antifouling Paint, Interflex 8700 SPC Tin-free Self-polishing Copolymer Antifouling Paint.
Data source: International original Technical Data Sheet (TDS), "Intersleek 1001 Elastic Foul-release Coating"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 72% ± 2% |
|---|---|
| Dry Film Thickness | 150 µm |
| Theoretical Spreading Rate | 4.8 m²/L |
| VOC | 263 g/L (neat) (EPA Method 24) 238 g/kg(… |
| Density / Specific Gravity | — |
| Number of Components | Three-component |
| Mixing Ratio | Component A : Component B : Component C = 7.4:1.6:1.0 (by volume) |
| Colour / Appearance | BXA100-white, BXA101-grey, BXA102-blue, BX… |
| Gloss |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
A three-component foul-release coating.
Used as the topcoat in the Intersleek 1000 coating system.
For newbuilding, and maintenance and repair.
| Colour | BXA100-white, BXA101-grey, BXA102-blue, BXA107-red, BXA109-black |
|---|---|
| Topcoat/gloss | Gloss |
| Component B (curing agent) | BXA103 (Component B), BXA104 (Component C). |
| Volume Solids | 72% ±2% (ISO 3233:1998) |
| Mixing ratio | Component A : Component B : Component C = 7.4:1.6:1.0 (by volume) |
| Standard film thickness | 150 µm DFT (208 µm WFT) |
| Theoretical Spreading Rate | At 150 µm dry film thickness, the theoretical spreading rate is 4.8 m²/L, allowing an appropriate loss factor. |
| Application Methods | Airless spray, brush, roller |
| Flash Point | Component A 41 °C; Component B 30 °C; mixed 32 °C; Component C 28 °C |
| Induction Time | Not required |
| Drying data | 10°C | 15°C | 25°C | 35°C |
| Touch dry [ISO 9117/3:2010] | 7 h | 6 h | 3 h | 60 min |
| Hard dry [ISO 9117-1:2009] | 9 h | 8 h | 5 h | 2 h |
| Before launching | 48 h | 36 h | 20 h | 17 h |
| Pot life after mixing | 120 min | 100 min | 60 min | 30 min |
| Note | At temperatures between 10 °C and 20 °C, the interval before launching can be reduced to 24 hours, provided the vessel is moored for at least 2 days after launching. |
|---|
| Recoat data — see the “Limitations” section | Substrate Temperature | |||||||
| 10°C | 15°C | 25°C | 35°C | |||||
| When recoating the following products | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum |
| Note | For overcoating recommendations, consult your local International Paint representative. |
|---|
| Volatile Organic Compounds | 263 g/L (neat) (EPA Method 24) 238 g/kg (neat liquid paint). EU Solvent Emissions Directive (Commission Directive 1999/13/EC). VOC values are typical values provided for reference only. They may vary with factors such as colour and normal manufacturing tolerances. |
|---|
This product contains no organotin compounds acting as biocides and complies with the international treaty adopted by the IMO in October 2001 on the control of harmful antifouling systems on ships (IMO document AFS/CONF/26).
When used as part of an approved system, this product holds the following certificates: the product has been approved by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • Bureau Veritas • Det Norske Veritas • Korean Register of Shipping • Lloyd's Register. For details, consult your local representative.
Approval by external bodies may depend on the formulation and/or the production plant
For the paint system best suited to the surface to be protected, consult your local representative.
Applied in accordance with the standard Worldwide Marine Specifications.
All surfaces shall be clean, dry and free of contaminants.
Wash with high-pressure or ordinary fresh water as appropriate, and remove all oil, grease, soluble contaminants and other foreign matter in accordance with the SSPC-SP1 solvent cleaning standard.
Intersleek 1001 must always be applied over the Intersleek tie coat within the specified overcoating interval. For specific recommendations, consult your local representative.
The coating is supplied in three containers as one unit. Always mix the entire unit in the supplied ratio.
(1) Stir Component A with a power mixer.
(2) Mix all of Component A with Component B and stir thoroughly with a power mixer.
(3) Add all of Component C and stir thoroughly with a power mixer.
Once a unit of paint is mixed, it shall be used within the specified pot life.
Not recommended. Only in special cases, use International GTA007. Do not thin beyond the limits of local environmental regulations.
Recommended nozzle size 0.38–0.53 mm (15–21 thou); total output fluid pressure at the nozzle not less than 211 kg/cm² (3000 psi)
Conventional spray application is not recommended.
Brush application is recommended for small areas only. Several coats may be required to achieve the specified film thickness.
Roller application is recommended for small areas only. Several coats may be required to achieve the specified film thickness.
International GTA220/GTA822
Do not leave paint in hoses, spray guns or spray equipment. Flush all equipment thoroughly with International GTA220/GTA822. Once mixed, paint should not be resealed; if work is interrupted for too long, mix a fresh batch before resuming application.
All equipment should be cleaned immediately after use with International GTA220/GTA822. Flushing spray equipment periodically during the day is good working practice. Cleaning frequency depends on the volume sprayed, temperature and time in use (including delays). Do not exceed the pot life of the paint.
All surplus paint and empty containers must be disposed of in accordance with appropriate local regulations/laws.
If welding or flame cutting is performed on metal coated with this product, dust and fumes will be released; use suitable personal protective equipment and local exhaust ventilation. In North America, follow the instructions in ANSI/ASC Z49.1 “Safety in Welding and Cutting”.
All work related to the application and use of this product must comply with national health, safety and environmental protection standards and regulations.
Before using this product, obtain, read and follow the health and safety information in the Material Safety Data Sheet for the product. Read and observe all precautions in the Material Safety Data Sheet and on the container label. If these warnings and requirements are not fully understood, or cannot be strictly observed, do not use the product. During application and drying of the product, provide adequate ventilation and protective measures to keep solvent vapour concentrations within safe limits, so as to prevent poisoning or oxygen deficiency. Take protective measures to avoid skin and eye contact with the product (e.g. gloves, goggles, face shield, barrier cream). Specific safety measures depend on the application method and working environment.
Emergency contact: USA/Canada — medical 1-800-854-6813; Europe — tel. (44) 191 4696111, hospital and doctor (44) 207 6359191; China — tel. (86) 532 83889090; other regions — contact the regional office.
The minimum acceptable substrate temperature for application is 10 °C. A minimum relative humidity of 30% is required to ensure proper curing. If the relative humidity is below 30%, a longer curing time will be required.
Take care to avoid overspray on other coated areas.
Intersleek 1001 must always be applied over the Intersleek tie coat within the specified overcoating interval. For specific recommendations, consult your local representative. Before use or before using other coatings, all equipment must be thoroughly cleaned to prevent contamination. Liquid cleaners not permitted for Intersleek 1001 must not contaminate other paints.
Recoat data are for guidance only and depend on local climatic and environmental conditions. For specific advice, consult your local International Paint representative.
Apply in good weather. The temperature of the surface to be coated must be at least 3 °C above the dew point. Unless otherwise specifically instructed, raise the paint temperature to between 21 and 27 °C before mixing and application to achieve optimum application performance. Unmixed paint (in sealed containers) must be stored protectively as specified in the Storage section of this product data sheet. The technical and application data given here are intended as general guidance for establishing an application procedure. Test results are obtained in a controlled laboratory environment, and International Paint does not claim that the published test results, or any other test results, accurately represent results obtained in all site environments. Because application, environmental and design parameters vary widely, care must be exercised in coating selection, performance verification and use.
| Packaging Specifications | Component A | Component B | Component C | |||
| Volume | Packaging | Volume | Packaging | Volume | Packaging | |
| 10 L | 7.43 L | 10 L | 1.58 L | 2.5 L | 0.99 L | 1 L |
For other packaging sizes, consult International Paint.
| Packaging Specifications | Packaging weight |
|---|---|
| 10 L | 12.4 kg |
| Shelf life | 9 months at 35 °C or below. Inspect before use thereafter. Store in a cool, dry place, away from heat sources and sources of ignition. |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
