8250 RUST INHIBITIVE OIL CK Petroleum Resin Varnish is a topcoat. RUST INHIBITIVE OIL CK is a varnish mainly composed of special petroleum resin and mineral spirits, usually used as temporary protection for crude oil tanks. Parameters on this page: volume solids 56 ± 2% (ISO: 3233), dry film thickness 20 µm, theoretical spreading rate 0.036 L/m². Comparable products of the same brand: 100 EVASIGN No.100 Modified Alkyd Resin Topcoat, 2400A EVAMARINE Alkyd Topcoat, 4038G ACRI 700 FINISH G Acrylic Topcoat.
Data source: CMP original Technical Data Sheet (TDS), "8250 RUST INHIBITIVE OIL CK Petroleum Resin Varnish"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 56 ± 2% (ISO: 3233) |
|---|---|
| Dry Film Thickness | 20 µm |
| Theoretical Spreading Rate | 0.036 L/m2 |
| VOC | 399 g/L (Method 24) |
| Density / Specific Gravity | 0.93 g/mL (ISO: 2811) |
| Number of Components | One-component |
| Flash Point | 42.5°C |
| Thinner | MARINE THINNER |
| Colour / Appearance | Colourless, transparent |
RUST INHIBITIVE OIL CK is a varnish mainly composed of special petroleum resin and mineral spirits, usually used as temporary protection for crude oil tanks.
| Type | Petroleum Resin Varnish |
|---|---|
| Use | Temporary protective primer |
| Colour | Colourless, transparent |
|---|---|
| Flash Point | 42.5°C |
| Density | 0.93 g/mL (ISO: 2811) |
| Volume Solids | 56 ± 2% (ISO: 3233) |
| Volatile organic compound content | 399 g/L (Method 24) |
| Theoretical spreading rate | 0.036 L/m2 |
| Wet Film Thickness | 36 µm |
| Dry Film Thickness | 20 µm |
Drying Time
| Temperature | 5 °C | 10 °C | 20 °C | 30 °C |
| Surface Dry | 1 h | 30 min | 15 min | 5 min |
| Hard Dry | 4 h | 2 h | 1 h | 30 min |
| Recoat interval | Minimum; maximum |
|---|
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 0 °C |
| Humidity | Maximum 85% |
| Airless spray: viscosity | 90 seconds (Ford Cup No. 4) |
| Nozzle | Graco 615,717 |
| Paint output pressure | 10.7-13.8 Mpa |
| Spray gun speed | 60–80 cm/s |
| Thinner | MARINE THINNER |
| Thinning | -% by volume |
| Preceding coat | - |
| Subsequent coat | - |
| Packaging | One-component |
Note: 1 This product dissolves in crude oil, but does not affect the quality of the crude oil.
2. Density, volume solids and VOC content are theoretical calculated values without thinner.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
