5989 CMP BIOCLEAN MARKING Silicone Antifouling belongs to Antifouling, silicone system. CMP BIOCLEAN MARKING is a one-component silicone-based antifouling coating. Parameters on this page: Volume Solids 72 ± 2%, Dry Film Thickness (DFT) 100 µm, Theoretical Spreading Rate 0.139 L/m2. Comparable models from the same brand: 5981B CMP BIOCLEAN PLUS Silicone Antifouling, 5982 CMP BIOCLEAN HB Silicone Antifouling, 5984 CMP BIOCLEAN R Silicone Antifouling.
Parameter source: CMP original technical data sheet (TDS) "5989 CMP BIOCLEAN MARKING Silicone Antifouling"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 72 ± 2% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 0.139 L/m2 |
| VOC | 241 ± 20 g/L |
| Density / Specific Gravity | 1.07 ± 0.05 g/ml |
| Number of Components | One-component |
| Flash Point | 26.5°C |
| Thinner | SILICON THINNER A, EPOXY THINNER A(… |
| Colour / Appearance | Black |
CMP BIOCLEAN MARKING is a one-component silicone-based antifouling coating.
| Type | Silicone antifouling |
|---|---|
| Use | Can be used as the topcoat and marking coat of the CMP BIOCLEAN antifouling system |
| Colour | Black |
|---|---|
| Flash Point | 26.5°C |
| Density | 1.07 ± 0.05 g/ml |
| Volume Solids | 72 ± 2% |
| Volatile organic compound content | 241 ± 20 g/L |
| Theoretical spreading rate | 0.139 L/m2 |
| Thickness | Wet Film Thickness (WFT) 139 µm |
| Dry film | 100 µm |
(DFT = 200 µm) Drying Time
| Temperature | 0 °C | 5 °C | 10 °C | 20 °C | 30 °C |
| Surface Dry | 10 h | 6 h | 3 h | 2 h | 1 h |
| Hard Dry | 20 h | 14 h | 10 h | 7 h | 5 h |
| Recoat interval | Minimum Maximum* |
|---|---|
| Immersion Interval | Minimum |
| Application method | Brush, Roller |
|---|---|
| Weather: temperature | 0-35°C |
| Humidity | 40-85% RH |
| Thinner | SILICON THINNER A, EPOXY THINNER A (for cleaning only) |
| Thinning | -% by volume |
| Preceding coat | CMP BIOCLEAN FINISH, HB, R |
| Subsequent coat | - |
| Packaging | One-component |
Note: 1. One set is an 8 L or 4 L pack. 2. Density, volume solids and volatile organic content are theoretically calculated from the formulation without thinner.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
