ZB18-12ZD ZINDN Metal Sealer is a topcoat. Used as a topcoat when decorative requirements exist on zinc surfaces. A one-component coating composed of synthetic polymer resin, aluminium paste and additives. Parameters on this page: theoretical spreading rate 0.08–0.12 kg/m²; number of components: one. Comparable products from the same brand: ZD1770-E74B Aircraft Grey High Chlorinated Polyethylene Topcoat, ZD5180 High-solids Polyurethane Topcoat, ZD6310-N01F Epoxy Oil-resistant Antistatic Topcoat.
Source: ZINDN original technical data sheet (TDS) 'ZB18-12ZD ZINDN Metal Sealer (Silver Metallic Topcoat)'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | 0.08-0.12 Kg/m2 |
| VOC | — |
| Density / Specific Gravity | Approx. 1.0 |
| Number of Components | One-component |
| Flash Point | 23°C |
| Thinner | ZX-06 ZD ZINDN Metal Sealer Thinner |
| Colour / Appearance | Silver |
ZB18-12
A one-component coating composed of synthetic polymer resin, aluminium paste and additives.
(1) High weathering resistance;
(2) Good gloss and colour retention;
(3) Good sealing performance and good intercoat adhesion;
(4) Fast drying.
Used as a topcoat when decorative requirements exist on zinc surfaces.
| Film colour | Silver |
|---|---|
| density | Approx. 1.0 |
| Flash Point | 23°C |
| Surface Preparation | The ZINDN cold-spray zinc layer surface should be clean and free of contaminants. |
|---|---|
| Thinner | ZX-06 ZD ZINDN Metal Sealer Thinner |
| Thinning ratio | 20~40% |
| Application viscosity | 15 ± 2 s (Ford No.4 cup, room temperature) |
| Application method | Conventional air spray or airless spray |
| Spray output pressure | 4~6kg/cm² |
| Nozzle diameter | 1.2mm |
| Theoretical quantity | 0.08~0.12 Kg / m2 |
| Film thickness, dry film | 20–30 µm |
Stir the coating thoroughly before thinning and use.
Use and handling of this product should comply with the applicable national or local government safety regulations. Avoid contact with skin and eyes. Wear protective equipment during application, ensure ventilation, and avoid inhaling solvent vapour or paint mist. If the product splashes into the eyes, rinse immediately with plenty of clean water and seek medical attention. Keep out of reach of children. Take measures against fire and explosion.
The product performance and application data listed above are for reference only. Actual service environments are diverse; for any unclear points, consult Wuxi Huadong ZINDN Technology Co., Ltd. The company reserves the right to revise this data sheet without further notice.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
