Hempel Aluminium Paint 51570 is recommended as a topcoat for the protection of hot surfaces of steel and woodwork such as hot pipes, exhaust pipes, chimneys and other items requiring an aluminium surface or light reflection in mildly to moderately corrosive environments. Hempel Aluminium Paint 51570 is an oil-resin-based general-purpose aluminium topcoat with excellent heat resistance and light reflection. Parameters on this page: volume solids 38 ± 2%, dry film thickness 25 µm, theoretical spreading rate 15 m²/L. Comparable models from the same brand: HEMPEL Non-slip Aggregate 67520, Hempel Easy-Clean Cargo Hold Paint, Hempel Gas Pipe Paint 87633.
Parameter source: HEMPEL original technical data sheet (TDS) “Hempel Aluminium Paint 51570”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 38 ± 2% |
|---|---|
| Dry Film Thickness | 25 µm |
| Theoretical Spreading Rate | 15 m²/L |
| VOC | 478 g/L (China) |
| Density / Specific Gravity | 0.9 kg/L |
| Number of Components | — |
| Flash Point | 33°C |
| Colour / Appearance | Aluminium 19000 * |
| Gloss |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Hempel Aluminium Paint 51570 is an oil-resin-based general-purpose aluminium topcoat with excellent heat resistance and light reflection.
Complies with EU Directive 2004/42/EC, subcategory i.
Hempel Aluminium Paint 51570 is recommended as a topcoat for the protection of hot surfaces of steel and woodwork such as hot pipes, exhaust pipes, chimneys and other items requiring an aluminium surface or light reflection in mildly to moderately corrosive environments.
- Complies with US FDA and EU food regulations for contact with dry food. For details, consult Hempel.
| Product safety | Flash point 33 °C |
|---|
| Regulations | Value |
| European Union | 495 g/L |
| USA (coatings) | 495 g/L |
| USA (regulatory) | 495 g/L |
| Canada | 495 g/L |
| China | 478 g/L |
| Hong Kong | 495 g/L |
| South Korea | 495 g/L |
Subject to applicable legislation; see the explanatory notes on hempel.com or the local Hempel website. Measured according to GB/T 23985-2009. The product complies with the VOC requirements of mandatory or recommended national standards; for details, consult the company representative.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 51570 |
|---|---|
| Standard colour / code | Aluminium 19000 * |
Aluminium Grey 19000
| Gloss | |
|---|---|
| Volume solids | 38 ± 2% |
| density | 0.9 kg/L |
| Recommended dry film thickness | 25 µm |
For further details, refer to the separate Hempel document Surface Preparation Guide.
Stir thoroughly before use.
Thinner
| Cleaning solvent | HEMPEL's Thinner 08080 |
|---|
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | No thinning required | Nozzle pressure: 10 MPa Nozzle tip size: 0.43 mm |
| Air Spray | No thinning required | Not applicable. |
| Brush | No thinning required | Not applicable. |
If brush or roller application is used, multiple coats are required to obtain the specified dry film thickness. Spray application is recommended to obtain a good appearance. Spray parameters are indicative and may be adjusted according to site conditions. Pressure values apply to the material at 20°C. (*For other application methods, consult a company representative!).
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 25 µm | 40 µm | 25 µm |
| Wet Film Thickness | 67 µm | 106 µm | 67 µm |
| Theoretical Spreading Rate | 15 m²/L | 9.4 m²/L | 15 m²/L |
Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval. To achieve optimum performance, avoid excessive film thickness.
| Surface temperature | 10°C | 20°C | 30°C | 40°C |
| Touch Dry | 60 min | 30 | 20 | 15 |
| Hard Dry | 9 h | 4 | 2½ | 2 |
Measured at 25 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
|---|---|
| Product | 60 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 13.1 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of Hempel Aluminium Paint 51570 are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 51570-19000 Aluminium | — | 20 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
