Used as a single coat on the internal walls of pipelines carrying dry desulfurized (low-sulfur) gas; the coating is designed to make the pipe interior smoother after application, thereby reducing the frictional resistance of the pipeline transport system. HEMPEL Gas Pipeline Paint 87633 is a two-component polyamide-cured epoxy meeting the requirements of the American Petroleum Institute technical standard RP 5L2. Parameters on this page: volume solids 69 ± 2%, dry film thickness 100 µm, theoretical spreading rate 6.9 m²/L. Comparable models from the same brand: HEMPEL Non-Skid Aggregate 67520, HEMPEL Easy-Clean Cargo Hold Paint, HEMPEL Silicone Aluminium Paint 56910.
Parameter source: HEMPEL original technical data sheet (TDS) for HEMPEL Gas Pipeline Paint 87633; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 69 ± 2% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 6.9 m²/L |
| VOC | 267 g/L (China) |
| Density / Specific Gravity | 1.3 kg/L |
| Number of Components | Two-component |
| Flash Point | 25°C |
| Thinner | HEMPEL's Thinner 08080 |
| Colour / Appearance | Brown-red 50890 * |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
87633
HEMPEL Gas Pipeline Paint 87633 is a two-component polyamide-cured epoxy meeting the requirements of the American Petroleum Institute technical standard RP 5L2.
Used as a single coat on the internal walls of pipelines carrying dry desulfurized (low-sulfur) gas; the coating is designed to make the pipe interior smoother after application, thereby reducing the frictional resistance of the pipeline transport system.
Tested and assessed according to ISO 15741, Internal Coatings for the Reduction of Friction in Non-Corrosive Gas Transmission Steel Pipes and Fittings for Onshore and Offshore Pipelines.
| Product safety | Flash point 25 °C |
|---|
| Regulations | Value |
| European Union | 267 g/L |
| USA (coatings) | 267 g/L |
| USA (regulatory) | 267 g/L |
| Canada | 267 g/L |
| China | 267 g/L |
| Hong Kong | 267 g/L |
| South Korea | 267 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 87633 |
|---|---|
| Product components | Base 87638 |
Curing agent 97693
| Standard colour / code | Brown-red 50890 * |
|---|---|
| Gloss | Semi-gloss |
| Volume solids | 69 ± 2% |
| density | 1.3 kg/L |
| Recommended dry film thickness | 100 µm |
87633
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 87638 : Curing agent 97693 (4 : 1 by volume)
Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08080 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
| Product temperature | 20°C |
|---|---|
| Pot Life | 90 min |
| Tools | Application parameters |
|---|
Nozzle pressure: 15 MPa
Tip size: 0.46–0.53 mm
| Air Spray | Not applicable. |
|---|---|
| Brush | Not applicable. |
If brush or roller application is used, several coats may be required to achieve the specified dry film thickness. Spray parameters are indicative and may be adjusted to suit site conditions. Pressure figures apply to the material at 20 °C. (*For other application methods, consult the company representative.)
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 60 µm | 130 µm | 100 µm |
| Wet Film Thickness | 87 µm | 188 µm | 145 µm |
| Theoretical Spreading Rate | 11 m²/L | 5.3 m²/L | 6.9 m²/L |
Depending on the application and area of use, the product may be specified at a film thickness different from that indicated. This changes the spreading rate, drying and curing times and overcoating intervals. Over-thickness shall be strictly controlled; locally it shall never exceed 150 µm [6.0 mil] DFT. On irregular surfaces, particular care is recommended to avoid over-application.
87633
| Surface temperature | 20°C |
| Touch Dry | 90 min |
| Hard Dry | 3½ h |
Measured at 100 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
| Binder | 12 months |
| Curing agent | 36 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 7.8 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
- Application methods - General application guide. This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
