HEMPEL Water-borne Line Marking Paint 28100 belongs to Water-borne. HEMPEL Water-borne Line Marking Paint 28100 is specifically tailored for airport traffic markings and is also used on asphalt and concrete pavements. It features good abrasion resistance and weather resistance, can be pre-mixed with glass beads, and provides excellent adhesion to the pavement and cohesion. Parameters on this page: volume solids 62 ± 2%, dry film thickness 255 µm, theoretical spreading rate 2.4 m²/L. Comparable products from the same brand: HEMPEL Water-borne Epoxy Paint 184CN, HEMPEL Water-borne Epoxy Paint 18500, HEMPEL Water-borne Epoxy Paint 48140.
Parameter source: HEMPEL original technical data sheet (TDS) “HEMPEL Water-borne Line Marking Paint 28100”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 62 ± 2% |
|---|---|
| Dry Film Thickness | 255 µm |
| Theoretical Spreading Rate | 2.4 m²/L |
| VOC | 53 g/L (China) |
| Density / Specific Gravity | 1.7 kg/L |
| Number of Components | — |
| Flash Point | 100°C |
| Colour / Appearance | White 10000 |
| Wet Film Thickness | 409 µm |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
28100
Hempel Water-borne Line Marking Paint 28100 is a fast-drying environmentally friendly coating based on acrylic emulsion.
It has good abrasion resistance and weather resistance, can be pre-mixed with glass beads, and has excellent adhesion to the road surface and excellent cohesion. Easy to apply.
Complies with US Federal Standard TT-P-1952F and the Ministry of Transport of the People's Republic of China industry standard JT/T280.
Hempel Water-borne Line Marking Paint 28100 is specially tailored for airport traffic markings and is also used on asphalt and concrete pavements. Due to its excellent adhesion over thermoplastic markings, it can also be used for over-marking on highways.
| Product safety | Flash point 100 °C |
|---|
| Regulations | Value |
| European Union | 35 g/L |
| USA (coatings) | 57 g/L |
| USA (regulatory) | 86 g/L |
| China | 53 g/L |
| Hong Kong | 53 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. VOC values may vary with colour; refer to Section 9 of the Safety Data Sheet. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
| Product code | 28100 |
|---|---|
| Standard colour / code | White 10000 |
| Volume solids | 62 ± 2% |
| density | 1.7 kg/L |
| Recommended dry film thickness | 255 µm |
For further details, refer to the separate Hempel document Surface Preparation Guide.
Stir thoroughly before use.
| Tools | Application parameters |
|---|---|
| Airless Spray | - |
28100
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 124 µm | 372 µm | 255 µm |
| Wet Film Thickness | 199 µm | 596 µm | 409 µm |
| Theoretical Spreading Rate | 5 m²/L | 1.7 m²/L | 2.4 m²/L |
Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval. To achieve optimum performance, avoid excessive film thickness.
- If brush or roller application is used, more coats are required to achieve the specified dry film thickness.
| Surface temperature | - |
| Surface Dry | 12 min |
| Dry to walk-on | 24 h |
Dry film thickness 255 µm determined under standard conditions; refer to Hempel's explanatory notes for details. To determine the dry state, refer to Application Specification COP FP1401-1 (drying test for high film thickness).
Recoat times are for reference only for products of the same generic chemical composition at the recommended dry film thickness (DFT).
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
|---|---|
| Product | 12 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. The shelf life stated on the product label is determined according to local climatic conditions. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 3.9 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
28100
More information is available at the Knowledge Centre: https://www.hempel.com/knowledge-center. The following documents are in the “Technical Guidelines” section:
https://www.hempel.com/knowledge-center/technical-guidelines Hempel
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
