9108 SEAJET 013 Epoxy Paint is an epoxy paint. Has excellent water resistance and excellent physical properties such as hardness, abrasion resistance and strong adhesion, with particularly excellent adhesion to antifouling paints. Parameters on this page: volume solids 45 ± 2%, dry film thickness 125 µm, theoretical spreading rate 0.28 L/m². Comparable products of the same brand: 5006 ALP 500 Epoxy Paint, 5055 BANNOH 500 Epoxy Paint, 5055D BANNOH 500 AC Epoxy Paint.
Data source: CMP original Technical Data Sheet (TDS), "9108 SEAJET 013 Epoxy Paint"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45 ± 2% |
|---|---|
| Dry Film Thickness | 125 µm |
| Theoretical Spreading Rate | 0.28 L/m2 |
| VOC | 472 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | SEAJET THINNER D |
| Mixing Ratio | Base : curing agent = 80:20 (by volume) |
| Colour / Appearance | Light grey |
SEAJET 013 is a tar-free epoxy anti-corrosive primer based on epoxy resin and pigments. Has excellent water resistance and excellent physical properties such as hardness, abrasion resistance and strong adhesion, with particularly excellent adhesion to antifouling paints.
In addition, it protects the integrity of the gel coat and prevents penetration.
| Type | Epoxy |
|---|---|
| Use | An anti-corrosive paint for steel parts of yachts and other vessels. Also prevents penetration of the gel coat. |
| Mixing Ratio | Base : curing agent = 80:20 (by volume) |
|---|---|
| Colour | Light grey |
| Flash Point | Base 21.2 °C; hardener 22.7 °C |
| Volume Solids | 45 ± 2% |
| Volatile organic compound content | 472 g/L |
| Theoretical spreading rate | 0.28 L/m2 |
| Wet Film Thickness | 281 µm |
| Dry Film Thickness | 125 µm |
(dry film 125 µm)
| Temperature | 5 °C | 10 °C | 20 °C | 30 °C | |
| Drying Time | Surface Dry | 5 h | 4 h | 3 h | 2 h |
| Hard Dry | 18 h | 15 h | 8 h | 6 h | |
| Recoat interval | At least | 18 h | 15 h | 8 h | 6 h |
| At most | - | - | |||
| Pot life | 18 h | 14 h | 7 h | 4 h |
| Application method | Airless spray, air spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 5 °C |
| Humidity | Maximum 85% RH |
| Airless spray: viscosity | 1.6-2.0Pa.s |
| Nozzle | Graco 621, 623 |
| Paint output pressure | 14.7-17.7 Mpa |
| Spray gun speed | 60–80 cm/s |
| Thinner | SEAJET THINNER D |
| Thinning | 0–10% by volume for airless spray and air spray |
| 15-25% | By volume for brush and roller |
| Preceding coat | - |
| Subsequent coat | SEAJET033, SEAJET034, SEAJET035, etc. |
| Packaging | Two-component |
Note: 1 *Refer to the paint system application instructions.
2 The VOC content is a theoretical calculated value.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
