9102 SEAJET 015 Acrylic Resin Primer is an acrylic paint used as a primer. SEAJET 015 is a special acrylic resin paint that, as a primer, provides excellent adhesion between FRP material and the subsequent antifouling coating. Parameters on this page: volume solids 30 ± 2%, dry film thickness 40 µm, theoretical spreading rate 0.133 L/m2. Comparable models from the same brand: 4037J ACRI 700 PRIMER J acrylic anti-corrosive primer, 1050 NZ PRIMER S zinc-free epoxy shop primer, 200 GALVANITE No.200 PRIMER epoxy galvanized steel primer.
Parameter source: CMP original technical data sheet (TDS) "9102 SEAJET 015 Acrylic Resin Primer"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 30 ± 2% |
|---|---|
| Dry Film Thickness | 40 µm |
| Theoretical Spreading Rate | 0.133 L/m2 |
| VOC | 597 g/L |
| Density / Specific Gravity | 1.09 g/mL |
| Number of Components | One-component |
| Flash Point | 21.5°C |
| Thinner | SEAJET THINNER A |
| Colour / Appearance | Silver |
SEAJET 015 is a special acrylic resin paint that, as a primer, provides excellent adhesion between FRP material and the subsequent antifouling coating.
In addition to fast drying and a hard, flexible film, it provides excellent weather resistance and seawater corrosion resistance.
| Type | Acrylic Resin Primer |
|---|---|
| Use | Primer and tie coat for FRP boat hull bottoms |
| Colour | Silver |
|---|---|
| Flash Point | 21.5°C |
| Density | 1.09 g/mL |
| Volume Solids | 30 ± 2% |
| Volatile organic compound content | 597 g/L |
| Theoretical spreading rate | 0.133 L/m2 |
| Wet Film Thickness | 133 µm |
| Dry Film Thickness | 40 µm |
| Temperature | 5 °C | 10 °C | 20 °C | 30 °C | |
| Drying Time | Surface Dry | 40 min | 30 min | 20 min | 15 min |
| Hard Dry | 4 h | 3 h | 2 h | 1.5 h | |
| Recoat interval | At least | 5 h | 4 h | 3 h | 2 h |
| At most | - | - |
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 0 °C |
| Humidity | Maximum 85% RH |
| Airless spray: viscosity | 40 s |
| Nozzle | Iwata W-77-2S and similar |
| Spray gun speed | 80–100 cm/s |
| Thinner | SEAJET THINNER A |
| Thinning | 15–25% by volume |
| Preceding coat | - |
| Subsequent coat | SEAJET033, SEAJET034, SEAJET035 |
| Packaging | One-component |
Note 1: density, volatile organic content and volume solids are theoretically calculated values excluding thinner.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
