BITUMEN SOLUTION B is a bitumen paint with excellent adhesion to steel. It can be used as a primer for liquid bitumen enamel, and can also provide temporary anticorrosive protection on its own. Parameters on this page: dry film thickness 30-50 µm, theoretical spreading rate 0.073-0.121 L/m², number of components: one-component. Comparable models from the same brand: 2330B NON-SKID DECK SAND non-skid aggregate, 3007 SILVAX SQ-K vinyl primer, 4008 CMP AC special synthetic resin anticorrosive paint.
Parameter source: CMP original technical data sheet (TDS) for 8440 BITUMEN SOLUTION B Bitumen Paint; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 41% |
|---|---|
| Dry Film Thickness | 30–50 µm |
| Theoretical Spreading Rate | 0.073-0.121 L/m2 |
| VOC | 499 g/L |
| Density / Specific Gravity | — |
| Number of Components | One-component |
| Flash Point | 31°C |
| Thinner | MARINE THINNER |
| Colour / Appearance | Black |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
BITUMEN SOLUTION B is a bitumen paint with excellent adhesion to steel. It can be used as a primer for liquid bitumen enamel, and can also provide temporary anticorrosive protection on its own.
| Type | Bitumen paint |
|---|---|
| Use | Used as a protective coating for the inner side of rudders and various other steel mechanisms, etc. |
| Colour | Black |
|---|---|
| Flash Point | 31°C |
| Volume Solids | 41% |
| Volatile organic compound content | 499 g/L |
| Theoretical spreading rate | 0.073-0.121 L/m2 |
| Wet Film Thickness | 73-121 µm |
| Dry Film Thickness | 30–50 µm |
Drying time, overcoating interval
| Temperature | 5 °C | 10 °C | 20 °C | 30 °C |
| Surface Dry | 2 h | 1.5 h | 1 h | 30 min |
| Hard Dry | 6 h | 5 h | 3 h | 2 h |
| At least | 6 h | 5 h | 3 h | 2 h |
| At most | - | |||
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 0 °C |
| Humidity | Maximum 85% RH |
| Airless spray: viscosity | 0.7 Pa.S |
| Nozzle | Graco 515, 517 |
| Paint output pressure | 11.7-14.7 Mpa |
| Spray gun speed | 60–80 cm/s |
| Thinner | MARINE THINNER |
| Thinning | 0–5% by volume |
| Preceding coat | EVABOND, WELBOND, CERABOND, NZ PRIMER, EPICON ZINC RICH PRIMER |
| Subsequent coat | - |
| Packaging | One-component |
Note: 1. Volatile organic compound content and volume solids are theoretical values calculated without thinner.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
