6135H UMEGUARD SX Epoxy is an epoxy coating. It has excellent physical properties such as strong adhesion, a tough, abrasion-resistant film, and chemical resistance to pure water, seawater and crude oil. Parameters on this page: volume solids 57 ± 2%, theoretical spreading rate 0.175-0.439 L/m², number of components: two-component. Comparable models from the same brand: 5006 ALP 500 Epoxy, 5055 BANNOH 500 Epoxy, 5055D BANNOH 500 AC Epoxy.
Parameter source: CMP original technical data sheet (TDS) for 6135H UMEGUARD SX Epoxy; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 57 ± 2% |
|---|---|
| Dry Film Thickness | 100–250 µm |
| Theoretical Spreading Rate | 0.175-0.439 L/m2 |
| VOC | 432 g/L |
| Density / Specific Gravity | 1.34 g/ml |
| Number of Components | Two-component |
| Thinner | EPICON THINNER A |
| Mixing Ratio | Base : curing agent = 85:15 (by volume) |
| Colour / Appearance | Grey (N6, N7), red-brown and others |
UMEGUARD SX is an epoxy paint. It has excellent physical properties such as strong adhesion, a tough, abrasion-resistant film, and chemical resistance to pure water, seawater and crude oil.
| Type | Epoxy |
|---|---|
| Use | It can be used as a protective coating for cargo holds, accommodation interiors and exteriors, void spaces, cofferdams, engine rooms, pipelines and other steel structures. |
| Mixing Ratio | Base : curing agent = 85:15 (by volume) |
|---|---|
| Colour | Grey (N6, N7), red-brown and others |
| Flash Point | Base 23.5 °C Curing agent 19 °C |
| Density | 1.34 g/ml |
| Volume Solids | 57 ± 2% |
| Volatile organic compound content | 432 g/L |
| Theoretical spreading rate | 0.175-0.439 L/m2 |
| Thickness | Wet film 175-439 µm; dry film 100-250 µm |
(dry film 250 µm)
| Temperature | 5 °C | 10 °C | 20 °C | 30 °C | |
| Drying Time | Surface Dry | 4.5 h | 3.5 h | 2.5 h | 1.5 h |
| Hard Dry | 44 h | 27 h | 17 h | 12 h | |
| Recoat interval | At least | 44 h | 27 h | 17 h | 12 h |
At most*
| Pot life | 24 h 14 h 8 h 5 h |
|---|
| Application method | Airless spray, brush, roller |
|---|---|
| Weather: temperature | Minimum 5 °C |
| Humidity | Maximum 85% RH; steel temperature at least 3 °C above the dew point |
| Airless spray: viscosity | 1.5-2.0s |
| Nozzle | (Graco)623 |
| Paint output pressure | 14.7-17.7 Mpa |
| Spray gun speed | 60–80 cm/s |
| Thinner | EPICON THINNER A |
| Thinning | 0–15% by volume |
| Preceding coat | CERABOND 2000, NZ PRIMER S, EPICON ZINC RICH PRIMER B-2 |
| Subsequent coat | EPICON FINISH HB, ACRI 700 FINISH J, etc. |
| Packaging | Two-component |
Note: 1. In confined spaces or restricted spaces at low temperature, ventilation is necessary to remove volatilised solvent and promote film formation during application and drying.
2. In general, epoxy coating UMEGUARD SX cannot avoid chalking and fading under ultraviolet light.
3. Waiting time before loading the first cargo
| Temperature | 10 °C | 20 °C | 30 °C |
| Days | 20 days | 12 days | 7 days |
4. Density, volume solids and volatile organic compound content are theoretical values.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item codes of 6135H UMEGUARD SX Epoxy are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 6135H UMEGUARD SX CS-511 | — | 20 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
