5402C EPICON FINISH HB Epoxy Topcoat is an epoxy paint used as a topcoat. EPICON FINISH HB is a high-build topcoat based on epoxy polyamide resin. Parameters on this page: volume solids 53 ± 2%, dry film thickness 30–100 µm, theoretical spreading rate 0.057–0.189 L/m². Comparable products of the same brand: 5402D EPICON FINISH HB EX Epoxy Topcoat, 5412A EPICON FINISH HS Epoxy Topcoat, 100 EVASIGN No.100 Modified Alkyd Resin Topcoat.
Parameter source: CMP manufacturer's Technical Data Sheet (TDS) "5402C EPICON FINISH HB Epoxy Topcoat"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 53 ± 2% |
|---|---|
| Dry Film Thickness | 30–100 µm |
| Theoretical Spreading Rate | 0.057-0.189 L/m2 |
| VOC | 463 |
| Density / Specific Gravity | 1.17 g/ml |
| Number of Components | Two-component |
| Thinner | EPOXY THINNER A |
| Mixing Ratio | Base : curing agent = 74:26 (by volume) |
| Colour / Appearance | White, as specified colour |
CHUGOKUMARINE PAINTS !
| Type | Epoxy topcoat |
|---|---|
| Use | It can be used as an exterior topcoat of the BPICON MARINE series for the interior and exterior of steel ship superstructures, bridges, and other steel structures. |
| Mixing Ratio | Base : curing agent = 74:26 (by volume) |
|---|---|
| Colour | White, as specified colour |
| Flash Point | Base 23°C; Hardener 27.5°C |
| Density | 1.17 g/ml |
| Volume Solids | 53±2% |
| Volatile organic compound content | 463 |
| Theoretical spreading rate | :0.057-0.189 L/m2 |
| Thickness | Wet film thickness 57–189 µm |
| Dry film | 30–100 µm |
(dry film 100 µm)
| Temperature | -5°C | 0°C | 5°C | 10°C | 20°C | 30°C | |
| Drying Time | Surface Dry | 5.5 h | 4.5 h | 3.5 h | 2.5 h | 1.5 h | 1 h |
| Hard Dry | 55 h | 38 h | 28 h | 16 h | 12 h | ||
| Recoat interval | At least | 55 h | 44 h | 24 h | 18 h | 10 h | 8 h |
At most*
| Pot life | 24 h 24 h 24 h 12 h 12 h 8 h |
|---|
| Application method | Airless Spray |
|---|---|
| Weather | Temperature: minimum -5°C; humidity: maximum 85% RH |
| Airless spray: viscosity | 1.5Pa.s |
| Nozzle | Graco719, 721 |
| Paint output pressure | 14.7-17.7 |
| Spray gun speed | 60–80 cm/s |
| Thinner | EPOXY THINNER A |
| Thinning | 0–7% by volume |
| Preceding coat | BANNOH 500, BANNOH 200 and other models |
| Subsequent coat | - |
| Packaging | Two-component |
Note: 1* Refer to the application specification. 2 In enclosed spaces or confined spaces under low-temperature conditions, ventilation equipment is required to remove evaporated solvent and promote coating film formation during application and film formation.
3 Excess solvent may reduce sag resistance. 4 Application is possible when the temperature drops to -5°C, but hard dry takes a long time, and full cure is achieved only as the temperature rises. 5 Due to the characteristics of the epoxy coating EPICON FINISH HB, chalking and fading under UV exposure cannot be avoided.
6 VOC content and density are theoretical values calculated for a representative colour formulation (black) without thinner. These values vary with different colour formulations.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers for 5402C EPICON FINISH HB epoxy topcoat are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 5402C EPICON FINISH HB CS-614 | — | 20 L |
| 5402C EPICON FINISH HB Munsell N7 | — | 20 L |
| 5402C EPICON FINISH HB CS-611 | — | 20 L |
| 5402C EPICON FINISH HB CS-625 | — | 20 L |
| 5402C EPICON FINISH HB CS-518 | — | 20 L |
| 5402C EPICON FINISH HB 7.5BG7 | 2 | 20 L |
| 5402C EPICON FINISH HB N9.5 | — | 20 L |
| 5402C EPICON FINISH HB RAL2000 | — | 20 L |
| 5402C EPICON FINISH HB CS-622 | — | 20 L |
| 5402C EPICON FINISH HB CS-651 | — | 20 L |
| 5402C EPICON FINISH HB CS-516 | — | 20 L |
This model has a total of11item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
