China-based coatings exporter — industrial & marine protective coatings from China's production bases

5084J BANNOH 1500 N Z Epoxy

Quick Specs

5084J BANNOH 1500 N Z Epoxy belongs to epoxy coatings. 2. Excellent recoating compatibility with antifouling coatings. Parameters on this page: volume solids 64 ± 2%, dry film thickness 100 µm, theoretical spreading rate 0.156 L/m2. Comparable products of the same brand: 5006 ALP 500 Epoxy, 5055 BANNOH 500 Epoxy, 5055D BANNOH 500 AC Epoxy.

Parameter source: CMP manufacturer's Technical Data Sheet (TDS) "5084J BANNOH 1500 N Z Epoxy"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.

This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.

Request a Quote

Volume Solids	64 ± 2%
Dry Film Thickness	100 µm
Theoretical Spreading Rate	0.156 L/m2
VOC	363 g/L
Density / Specific Gravity	1.39 g/mL
Number of Components	Two-component
Thinner	EPOXY THINNER A
Mixing Ratio	Base : curing agent = 85:15 (by volume)
Colour / Appearance	Dark purple

Browse Similar Models by CategoryThis model belongs to: Epoxy

Coating Position

Primer Intermediate Coat Topcoat Auxiliary

Functional Category

Zinc-rich Primer Glass Flake Antifouling Heat-resistant Fire Protection Potable Water Tank Cold galvanizing Thermal Insulation

Resin Type

Epoxy Water-borne Polyurethane, fluorocarbon Acrylic Silicone Alkyd Inorganic Zinc Silicate Fluorocarbon Chlorinated Rubber Phenolic Vinyl Ester

Technical data

Type	Epoxy
Use	Used as an anti-corrosive tie coat for the hull shell

Documents

Mixing Ratio	Base : curing agent = 85:15 (by volume)
Colour	Dark purple
Flash Point	Base 24.6 °C, curing agent 27.7 °C
Density	1.39 g/mL
Volume Solids	64 ± 2%
Volatile organic compound content	363 g/L
Theoretical spreading rate	0.156 L/m2
Thickness	WFT 156 µm
Dry film	100 µm

(dry film 200 µm)

	Temperature	-5 °C	0 °C	5 °C	10 °C	20 °C	30 °C
Drying Time	Surface Dry	10 h	7 h	5 h	4 h	3 h	2 h
Drying Time	Hard Dry	48 h	28 h	18 h	15 h	8 h	6 h
Recoat interval	At least	48 h	28 h	18 h	15 h	8 h	6 h
Recoat interval	At most*	*	*	*
Pot life		8 h	7 h	6 h	5 h	3 h	1.5 h

Application conditions

Application method	Airless spray, brush
Weather: temperature	Minimum -5 °C
Humidity	Maximum 85% RH
Airless spray: viscosity	1.5-2.0Pa.s
Nozzle	Graco619, 621, 623
Paint output pressure	14.7-17.7Mpa
Spray gun speed	60–80 cm/s
Thinner	EPOXY THINNER A
Thinning	0–15% by volume

Recommended surface preparation

The whole surface shall be clean and dry, with all contamination removed.

Preceding coat	BANNOH 1500, BANNOH 2000 Z
Subsequent coat	SEA GRANDPRIX series, SEAFLO NEO, SEAFLO NEO SL, SEAFLO NEO Z, SEAFLO NEO FLAT Z, UNYMARINE, EPICON FINISH HB and others
Packaging	Two-component

Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.

FAQ

How many components does 5084J BANNOH 1500 N Z have?: 5084J BANNOH 1500 N Z is a two-component product; mix according to the mixing ratio in the "Application Data" table on this page before use.
What is the mixing ratio of 5084J BANNOH 1500 N Z?: The mixing ratio of 5084J BANNOH 1500 N Z is Base : Hardener = 85:15 (by volume).
What dry film thickness is normally applied for 5084J BANNOH 1500 N Z?: The standard dry film thickness of 5084J BANNOH 1500 N Z is 100 µm, determined by the coating system and design requirements.
What is the theoretical spreading rate of 5084J BANNOH 1500 N Z?: The theoretical spreading rate of 5084J BANNOH 1500 N Z is 0.156 L/m2; actual consumption is adjusted according to substrate roughness, application loss and colour hiding power.
What is the volume solids of 5084J BANNOH 1500 N Z?: The volume solids of 5084J BANNOH 1500 N Z is 64 ± 2%.
What is the VOC of 5084J BANNOH 1500 N Z?: The VOC of 5084J BANNOH 1500 N Z is 363 g/L.
Which thinner is used for 5084J BANNOH 1500 N Z?: Recommended thinner for 5084J BANNOH 1500 N Z: EPOXY THINNER A.
What is the flash point of 5084J BANNOH 1500 N Z?: The flash point of 5084J BANNOH 1500 N Z is 24.6°C for the Base and 27.7°C for the Hardener; storage, transport and application shall follow the product Safety Data Sheet.
How long does 5084J BANNOH 1500 N Z take to dry?: Drying time of 5084J BANNOH 1500 N Z under standard conditions: drying time, touch dry; actual results are affected by temperature, film thickness and ventilation.
Where can 5084J BANNOH 1500 N Z be purchased?: RichTech Industrial Technology (Shanghai) Co., Ltd. distributes industrial and marine coatings, representing brands including JOTUN, HEMPEL, International, PPG and KANSAI, and provides product selection, coating systems and quantity calculations. Company address: Changhui Building, 799 Yinxiang Road, Jiading District, Shanghai.

For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.

Similar models from the same brand — epoxy coating

View all CMP models

Purchase & Documents

Enquire / Request Quote & Lead Time View all CMP models

Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.