Water-borne Acrylic Topcoat ZD5100 belongs to water-borne coatings and is used as a topcoat. Used with a suitable water-borne primer, mainly for surface protection of steel structure buildings and mechanical equipment in light to medium corrosive environments. A prepared surface that becomes contaminated before the subsequent coating shall be re-prepared; the surface shall be clean, dry and well ventilated. Parameters on this page: DFT 40 µm, theoretical spreading rate 0.13 kg/m². Similar models from the same brand for comparison: Water-borne Acrylic Topcoat ZDW3051, Water-borne Acrylic Intermediate Coat ZDW2050, Water-borne Acrylic Sealer Primer ZDW1030.
Parameter source: ZINDN original technical data sheet (TDS) 'Water-borne Acrylic Topcoat ZD5100'; values such as spreading rate are converted from TDS parameters for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 0.13 kg/m² |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Thinner | Clean fresh water |
| Mixing Ratio | Water thinner amount based on viscosity adjustment |
| Colour / Appearance | Available in various colours |
| Intended use | Used with a suitable water-borne primer, mainly for surface protection of steel structure buildings and mechanical equipment in light to medium corrosive environments. |
|---|---|
| Features | Good outdoor weathering resistance, UV resistance and non-fading performance. |
| Packaging Specifications | 20 ㎏ |
| Colour | Available in various colours |
| Application Limitations | Relative humidity shall be below 85%; substrate temperature shall not be below 5°C and shall be at least 3°C above the air dew point. |
| Appearance of the Product as Supplied | Coloured viscous liquid, easy to stir uniformly. |
| Dry Film Thickness | 40µm |
| quantity | Under the above volume solids and DFT conditions, theoretical consumption is 0.13 kg/m²; allowing for appropriate loss factors, actual consumption varies with specific application conditions. |
| Shelf life | 6 months from the date of manufacture under normal storage and transport conditions. |
| Thinner | Clean fresh water |
| Cleaning solvent | Fresh water |
| Compatible Products | For steel structure surfaces, the previous coats mainly include water-borne epoxy anti-corrosive primer, water-borne acrylic anti-corrosive primer and water-borne alkyd anti-corrosive primer, and water-borne epoxy intermediate coat; the subsequent coat includes water-borne acrylic topcoat with matching clearcoat. |
| Suitable substrates | Properly prepared, dry and clean substrate surface. |
| Surface Preparation | Use the corresponding surface preparation method according to substrate type. A prepared surface that is contaminated before the subsequent coating shall be re-prepared. |
| Application Environment | Clean, dry and well ventilated; for outdoor application, monitor the weather forecast closely to ensure each coat is not affected by rain or fog within 24 h after application; suitable application temperature is 10–40°C. |
| Mixing ratio | Water thinner amount based on viscosity adjustment |
| Application Method | Mainly by spray application. |
| Recoating Interval | 6h |
| Recoat interval | Minimum 15 h, maximum 5 days (23°C). If the recoating interval exceeds 5 days, the previous coat generally requires sanding. |
| Drying Time | Touch dry 2 h, hard dry 24 h, GB/T1728 Method B. |
| Film Appearance | Conforms to the standard panel and the agreed colour variation and gloss ranges; smooth and fine, with uniform colour. |
| Other Information | Refer to the company's application guide, safety data sheet and other relevant documents. |
| Disclaimer | This product is recommended for professional coating use only. The user is responsible for testing and evaluating the product to ensure it is safe and suitable under final application conditions. Where product application and use conditions are beyond the Company's control, the Company is responsible only for the quality of the product supplied. As products are improved, the Company reserves the right to update product information without prior notice. |
| Version Number | 160315ZD5100 |
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
