Korepox Zinc Rich Primer EZ175 zinc-rich epoxy primer belongs to zinc-rich primer, epoxy system. Parameters on this page: volume solids approx. 58% (determined per ISO 3233), DFT 35–75 µm (primer for long-term protection), theoretical spreading rate 5.8 m²/L/100 µm. Comparable models from the same brand: Korepox Zinc Rich Primer EZ175 zinc-rich epoxy primer, Korepox Zinc Rich Primer EZ175 zinc-rich epoxy primer, Korepox Zinc Rich Primer EZ175 zinc-rich epoxy primer.
Parameter source: KCC original technical data sheet (TDS) "Korepox Zinc Rich Primer EZ175(WM) zinc-rich epoxy primer"; values such as spreading rate are converted from TDS parameters and are for model selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 58% |
|---|---|
| Dry Film Thickness | 35–75 µm (primer for long-term protection) |
| Theoretical Spreading Rate | 5.8 m²/L/100 µm |
| VOC | — |
| Density / Specific Gravity | 2.5–2.7 kg/L (mixed) |
| Number of Components | Two-component |
| Thinner | No. 024 |
| Colour / Appearance | Flat, metallic grey (1184) |
| Packaging Specifications | 20L pack (EZ175(WM)-A: 16L, EZ175(WM)-B: … |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Korepox Zinc Rich Primer EZ175(WM) is a two-component polyamide-cured metallic zinc-rich epoxy primer that provides long-term protection for steel in severely corrosive environments and offers excellent resistance to mechanical abrasion.
Long-term protective primer for onshore and offshore wind turbine towers.
| Appearance and colour | Flat, metallic grey (1184) |
|---|---|
| density | Mixture, approx. 2.5–2.7 |
| Volume Solids | Approx. 58% (determined per ISO 3233) |
| Theoretical Spreading Rate | On smooth surfaces, dry film thickness 40 µm, 14.5 m²/L |
| Flash Point | Base EZ175(WM)-A: 15°C (closed cup); Hardener EZ175(WM)-B: 26°C (closed cup) |
Before application, remove all oil, grease, dust and other contaminants from the surface. * Steel: blast clean to Sa 2.5 or clean with power tools to St 3.
Brush application, spray (conventional or airless). Airless spray: nozzle orifice 432–533 µm (0.017–0.021″); spray pressure 13.5–29.2 MPa; spray angle 30–90°. Thinning: max. 25% (max. 50% when used as shop primer).
Base EZ175(WM)-A : Hardener EZ175(WM)-B = 4:1 (by volume). Mix completely 30 min before use; stir the base uniformly before adding the hardener.
Thinner No. 024. Do not thin the two components separately; the mixture shall be thinned.
The surface to be coated must be completely clean and dry. Relative humidity must not exceed 85%, and the surface temperature must be at least 2.7 °C (5 °F) above the dew point to avoid condensation.
Primer for long-term protection: dry film thickness 35–75 µm in one coat. Film thickness may be adjusted according to the application area and use.
| Substrate temperature | 5°C | 20°C | 30°C |
|---|---|---|---|
| Touch dry | 50 min | 20 min | 10 min |
| Curing/drying | 12 h | 6 h | 4 h |
Per coating specification.
8 h at 20°C.
At 20 °C/68 °F, minimum 4 h (as a main primer), maximum per specification.
Continuous: 93 °C; intermittent: 121 °C.
| Shelf life | 12 months |
|---|---|
| Packaging Specifications | 20L pack (EZ175(WM)-A: 16L, EZ175(WM)-B: 4L) |
Protect skin and eyes; avoid prolonged inhalation of evaporated solvent. Provide adequate ventilation; wear respiratory protective equipment when applying in confined spaces. Issue date: 2015-09-01.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
