KOREPOX TANKER SHELTER EP174 Epoxy belongs to Epoxy. Parameters on this page: volume solids approx. 64% (determined in accordance with ISO 3233), dry film thickness 100 µm (single coat), theoretical spreading rate 6.4 m²/L/100 µm. Comparable products of the same brand and type: KOREPOX EH2350 Modified High-solids Epoxy, KOREPOX EP174 Epoxy Wear-resistant Coating, Korepox H.B. EH2560 Epoxy.
Parameter source: KCC original technical data sheet (TDS) "KOREPOX TANKER SHELTER EP174(T) Epoxy"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | Approx. 64% |
|---|---|
| Dry Film Thickness | 100 µm (in one coat) |
| Theoretical Spreading Rate | 6.4 m²/L/100 µm |
| VOC | Max. 360 g/L |
| Density / Specific Gravity | 1.4 kg/L (after mixing, depending on colour) |
| Number of Components | Two-component |
| Thinner | 024 |
| Colour / Appearance | Flat, grey, cream |
| Packaging Specifications | 16 L pack (EP174(T)PTA: 12 L, EP174(T)PTB: … |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
KOREPOX TANKER SHELTER EP174(T) is a coating based on pure epoxy resin cured with an amine adduct, used as a paint for pharmaceutical and crude oil storage tanks; it resists a wide range of chemicals, solvents and fuels.
Suitable as tank lining paint for marine chemical storage tanks, barges, road tankers, and storage tanks in chemical plants and refineries.
| Appearance and colour | Flat, grey, cream |
|---|---|
| density | Mixture, approx. 1.4 depending on colour |
| Volume Solids | Approx. 64% (determined in accordance with ISO 3233) |
| Theoretical Spreading Rate | At a dry film thickness of 100 µm on a flat surface, 6.4 m²/L |
| Flash Point | Base EP174(T)-A: 39 °C (closed cup); hardener EP174(T)-B: 28 °C (closed cup) |
| Chemical Resistance | Refer to our Chemical Resistance List |
Completely remove rust, dust, moisture, oil and other contaminants from the substrate surface with clean water or a suitable solvent. Blast clean to Sa 2.5 "near-white or white metal blast cleaning".
Airless spray or brush application (for narrow areas). Airless spray: nozzle tip size 483–686 µm (0.019–0.027″); spray pressure 14.5–15.2 MPa; spray angle 40–60°.
Base (EP174(T)PTA): hardener (EP174(T)PTB) = 3:1 (by volume). Thoroughly mix the two components in the specified ratio before application.
Thinner 024. Do not thin individual components; the mixture must be thinned.
The surface must be clean and dry, and the relative humidity must be below 85%. To prevent moisture condensation, the substrate surface temperature shall be at least 3 °C above the dew point.
1 coat: dry film thickness 100 µm. The film thickness may be adjusted according to the application area and use.
| Substrate temperature | 10°C | 20°C | 30°C |
|---|---|---|---|
| Touch dry | 6 h | 3 h | 1.5 h |
| Hard Dry | 24 h | 12 h | 8 h |
KOREPOX TANKER SHELTER EP174(T) or as per the coating specification.
4 h at 20 °C.
At 20 °C, minimum 8 h; maximum: 7 days for outdoor exposure, 28 days for enclosed areas.
Max. 360 g/L (according to ISO 11890-1).
| Shelf life | 12 months |
|---|---|
| Packaging Specifications | 16 L pack (EP174(T)PTA: 12 L, EP174(T)PTB: 4 L) |
Prevent this product from contacting skin and eyes, and avoid prolonged inhalation of solvent vapour. Provide adequate ventilation during application; respiratory protective equipment must be worn when applying in confined spaces. Issue date: 2015-09-01.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
