Koramel Primer H.B. MP120 Modified Alkyd Primer is an alkyd coating used as a primer. Parameters on this page: volume solids 56 ± 2% (per ISO 3233), dry film thickness 70 µm (typical), theoretical spreading rate 5.6 m²/L/100 µm. Comparable products from the same brand: Koramel Primer H.B. MP120 Modified Alkyd Primer, GALVANY IZ180 Inorganic Zinc Primer, Koramel Enamel LT313 Alkyd Enamel.
Source: KCC original technical data sheet (TDS) "Koramel Primer H.B. MP120 Modified Alkyd Primer"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 56 ± 2% |
|---|---|
| Dry Film Thickness | 70 µm (typical) |
| Theoretical Spreading Rate | 5.6 m²/L/100 µm |
| VOC | 360 g/L |
| Density / Specific Gravity | Approx. 1.54 kg/L |
| Number of Components | One-component |
| Flash Point | 31 °C/88 °F (closed cup) |
| Thinner | No. 002 |
| Colour / Appearance | Flat. Light grey (1105), red (2272) |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
MP120 is a fast-drying modified alkyd resin primer, lead-free corrosion inhibitor, with excellent corrosion protection and economic benefits through reduced number of coats, widely used in ships and heavy-duty anticorrosion industry. Certified as a fire-resistant coating by Lloyd's Register (LR), Korean Register (KR) and DNV-GL (CE Marking).
As a high-build anticorrosive primer for ship steel structures and other engineering non-immersed areas in moderate and severe corrosive atmospheric environments (such as offshore and marine environments).
| Appearance and colour | Flat. Light grey (1105), red (2272) |
|---|---|
| Volume Solids | 56 ± 2% (per ISO 3233) |
| Volatile Organic Compounds | 360g/L |
| Theoretical Spreading Rate | On smooth surfaces, 8 m²/L at 70 µm dry film thickness |
| density | Approx. 1.54 |
| Flash Point | 31 °C/88 °F (closed cup) |
Before application, remove all oil, grease, dust and other contaminants from the surface to be coated by suitable methods such as solvent cleaning and fresh-water washing. * Steel: blast clean to Sa 2.5, or power-tool clean to St3, St2, etc.
The surface to be coated shall be completely clean and dry; the relative humidity shall not exceed 85%, and the surface temperature shall be at least 2.7 °C (5 °F) above the dew point to avoid condensation.
Thinner No. 002.
Apply by roller, brush or spray (air or airless). Airless spray: nozzle orifice 533–584 µm (0.021"–0.023"); nozzle pressure 19.7 MPa; fan 60°.
Dry film thickness 70 µm. The dry film thickness varies with use and area.
| Substrate Temperature | 5°C/41℉ | 20°C/68℉ | 30°C/86℉ |
|---|---|---|---|
| Touch Dry | 6 h | 2 h | 1 h |
| Hard Dry | 12 h | 4 h | 3 h |
At 20 °C/68 °F, minimum 8 h, maximum unlimited.
Koramel Enamel LT313, or per specification.
Continuous: 93 °C/200 °F (non-immersed area); intermittent: 121 °C/250 °F (non-immersed area).
| Shelf life | 12 months |
|---|---|
| Standard packaging sizes | 18L, 20L |
Protect skin and eyes from direct contact with liquid coating, and avoid prolonged inhalation of solvent vapours. Protect the respiratory system when used in confined or poorly ventilated spaces. April 2024, Revision 13.
The text on this page was generated by OCR of the manufacturer's TDS; individual characters may differ from the original. The manufacturer's TDS prevails.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The in-plant item numbers of Koramel Primer H.B. MP120 Modified Alkyd Primer are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| MP120-1105 grey | — | 20 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
