Jotatherm CSP1 Scrim Reinforcement Mesh for Cryogenic Spill Coating is an auxiliary material. Cryogenic liquid spill resistance: when applying Jotatherm TB550, it is used only as part of a system to resist embrittlement of the substrate caused by cryogenic liquid spill, such as LNG. When used to resist cryogenic liquid spill, a special fabric mesh must be embedded in Jotatherm TB550. Comparable products from the same brand: Jota Alfa Additive, Jota Fulfill 100 Unsaturated Polyester Fairing Compound, Jotatop BF30 Wind Blade Fairing Compound.
Source: JOTUN original technical data sheet (TDS) "Jotatherm CSP1 Scrim Reinforcement Mesh for Cryogenic Spill Coating"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
Key parameters are shown in the original technical data table below.
Jotatherm CSP1 Scrim
A glass-fibre polyester mesh. When used to resist cryogenic liquid spill, a special fabric mesh must be embedded in Jotatherm TB550.
Resistance to cryogenic liquid spillage:
When applying Jotatherm TB550, it acts only as part of the system to resist embrittlement of the substrate caused by spillage of cryogenic liquids such as LNG.
The Jotatherm CSP1 mesh shall be applied as described in the Jotatherm TB550 application guide to resist cryogenic liquid spillage.
Others
White, with red intermittent lines as identification marks
Region Regulations Test Standard VOC Value. The mesh uses red intermittent lines every 100 mm as identification marks.
Each interval line is 8.5 mm long.
Glass fibre density 300 tex.
Weight per square metre 112 g.
In China, the cleaning solvent must comply with GB 38508-2020
Weight per roll 14 kg.
Length per roll at least 100 m.
Width per roll 1.27 m.
Store in accordance with national regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
