Jota Fulfill 100 Unsaturated Polyester Filler is an auxiliary. Recommended for steel structures and various equipment, including but not limited to engines, mechanical equipment, railway carriages and special vehicles. It has excellent compatibility with epoxy primers and subsequent coats and is suitable for steel substrates exposed to atmospheric conditions. Parameters on this page: dry film thickness 200–2000 µm, theoretical spreading rate 5–0.5 m²/L, number of components: two. Comparable products of the same brand: Jota Alfa Additive, Jotatherm CSP1 Scrim Anti-cryogenic Spillage Reinforcement Mesh, Jotatop BF30 Wind Turbine Blade Filler.
Data source: JOTUN original Technical Data Sheet (TDS), "Jota Fulfill 100 Unsaturated Polyester Filler"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | 200–2000 µm |
| Theoretical Spreading Rate | 5–0.5 m²/L |
| VOC | 134 g/L (China) |
| Density / Specific Gravity | 1.7 kg/L |
| Number of Components | Two-component |
| Mixing Ratio | 100 parts : 3 parts (by weight) |
| Shelf life | 9 months : 6 months |
| Wet Film Thickness | 200–2000 µm |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Jota Fulfill 100
This is a two-component unsaturated polyester filler designed for dents and uneven surfaces on body parts. It is easy to mix and has excellent application and sanding performance. It has excellent compatibility with epoxy primers and subsequent coats and is suitable for steel substrates exposed to atmospheric conditions.
Industrial protective coatings:
Suitable for use as part of a complete system on various steel structures exposed to corrosive environments. Recommended for steel structures and various equipment, including but not limited to engines, mechanical equipment, railway carriages and special vehicles. Can be applied with a trowel, putty knife or spatula.
Others
Yellow, green
| Property | Test / Standard | Description |
| Density | Theoretical Value | 1.7 kg/L |
| Region | Regulations | Test / Standard | VOC Value |
| China | GB 30981-2020 Limit of harmful substances of industrial protective coatings | GB/T 34682-2017 | 134 g/L |
The data listed are based on factory batch production and may vary slightly with colour.
Typical recommended specification range
| Dry Film Thickness | 200–2000 µm |
| Wet Film Thickness | |
| Theoretical Spreading Rate | 5–0.5 m²/L |
| Theoretical Spreading Rate | 3–0.3 m²/kg |
Surface Preparation
| Substrate | Minimum | Recommended |
| Coated surface | A clean, dry and sound compatible primer. | |
This product may be applied by the following methods
| Trowel | A trowel, spatula, mixing board or other suitable tools can be used to achieve the required thickness and finish. |
|---|
| Unsaturated Polyester Filler | 100 parts |
| 3 parts |
| Cleaner | JOTUN Thinner No. 7 |
|---|
Under normal conditions, this product does not need to be thinned, and thinning is therefore not recommended.
When the thinner is used as a cleaning solvent, it must first comply with local regulatory requirements
In China, the cleaning solvent must comply with GB 38508-2020
| Substrate Temperature | 23 °C |
| Minimum recoat interval | 3 h |
| Abrade after drying/curing | 3 h |
| Dry/cured to service | 7 days |
For the maximum recoat interval, refer to the Application Guide (AG) for this product.
Minimum recoat interval after drying: the recommended minimum interval before applying the next coat.
Dry/cure to sandable: the film is in a dry state where it can be sanded without clogging the paper. Dry/cure to service: the minimum time before the coating can be permanently exposed to the specified environment/medium.
| Paint temperature | 23 °C |
| Pot Life | 25 min |
Depending on the actual exposure conditions in service, this product may be used with various primers and topcoats. Some reference systems are listed below. For specific systems, contact JOTUN.
| Previous Coat | Epoxy |
|---|
| Unsaturated Polyester Filler | Weight 3.5 kg | Container size (L) 3 |
| 0.1 kg | 0.1 |
The packaging sizes above are typical reference sizes for factory batch production. Due to regional regulatory differences, packaging sizes and capacities may vary by region.
Store in accordance with national regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
Storage temperature not exceeding 30 °C.
| Unsaturated Polyester Filler | 9 months |
| 6 months |
In some markets, the stated shelf life may be shortened to comply with local legal requirements. The above is the minimum shelf life; thereafter, testing is required to confirm quality remains acceptable.
For professional use only. Applicators and workers must be trained, experienced, capable and equipped to mix, stir and apply the coating correctly in accordance with JOTUN's technical documents. Applicators and workers must wear appropriate personal protective equipment when using this product. This guidance is provided based on current product knowledge. Any proposed modification to suit site conditions must be approved by the responsible JOTUN representative before use.
Read the safety warnings on the container packaging. Use in well-ventilated conditions. Avoid inhaling spray mist and avoid skin contact. In case of accidental splashes on skin, wash immediately with a suitable cleaner, soap and water. In case of eye contact, rinse thoroughly with water and seek medical attention immediately.
When used primarily as a primer or antifouling coating, products may show slight colour variation from batch to batch. Such products, and epoxy products used as topcoats, may chalk when exposed to sunlight.
Gloss and colour retention of topcoats depend on the colour type, the surrounding environment such as temperature and UV intensity, application quality and product type. Contact your local JOTUN office for further information.
The information in this datasheet is based entirely on knowledge gained in our laboratory and in practice. JOTUN products are regarded as semi-finished products, and their use is generally beyond our control. JOTUN therefore guarantees only the quality of the product itself. To comply with local regulations, the product may be adjusted, and we reserve the right to modify the datasheet without further notice.
Users should consult JOTUN for specific guidance on the suitability of the product for their requirements and applications.
In case of any discrepancy between language versions, the English (UK) version shall prevail.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
