Used as the thinner and equipment cleaner for a range of conventional products. Comparable products from the same brand: Interline 704HS high-solids tank coating, Interseal 670HS - Low Temperature - Global, Interseal 670HS - Temperate - Global low-surface-treatment high-solids.
Parameter source: International original technical data sheet (TDS) "International - GTA004"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
Key parameters are shown in the original technical data table below.
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
| Specific Gravity Flash Point | Product description |
|---|---|
| °C | °FGMA100 anti-slip aggregate. |
GMA130 non-slip aggregate.
GMA131 Anti-slip Aggregate.
GMA132 Anti-slip Aggregate.
GMA197 non-slip aggregate.
GMA904 conventional paint and varnish remover.
GPA900 non-slip aggregate.
GTA004
| 0.78 38 | 100 Used as a thinner and equipment cleaning solvent for a range of conventional products. |
|---|
GTA007
| 0.86 26 | 79 Used as a thinner and equipment cleaning solvent for a range of conventional products. |
|---|
GTA056
| 0.81 39 | 102 Used as a thinner and equipment cleaning solvent for certain Intershield and Interthane products in North America. |
|---|
GTA065
| 0.91 31 | 88 Used as a reactive thinner for certain polyester products. |
|---|
GTA075
| 0.84 3 | 37 Used as a thinner for certain epoxy shop primers in South America. |
|---|
GTA123
| 0.98 42 | 108 Used as a thinner and equipment cleaning solvent for Chartek products. |
|---|
GTA137
| 0.83 | 34 Used as a thinner and equipment cleaner for certain epoxy/polyurethane products in South America. |
|---|
GTA138
| 0.92 32 | 90 Used as a thinner and equipment cleaning solvent for certain Interzinc zinc silicate products. |
|---|
GTA203
| 0.81 -4 | 25 Used as a thinner and equipment cleaning solvent for certain Interzone products. |
|---|
GTA220
| 0.85 25 | 41 Used as a thinner and equipment cleaning solvent for a range of epoxy products. |
|---|
GTA313
| 0.94 34 | 93 Used as a thinner and equipment cleaner when applying polyurethane topcoats. |
|---|
GTA407
| 0.85 19 | 66 Used as a thinner and equipment cleaner for vinyl antifouling coatings in North America. |
|---|
GTA415
| 0.88 25 | 77 Used as a thinner and equipment cleaning solvent for a range of products. |
|---|
GTA713
| 0.91 30 | 86 Used as a thinner and equipment cleaning solvent for polyurethane products. |
|---|
GTA733
| 0.87 27 | 81 Used as a thinner for certain Interthane products. |
|---|
GTA803
| 0.82 -17 | 1 Used as a thinner and equipment cleaning solvent for certain Interplate and Interzinc products. |
|---|
GTA820
| 0.82 5 | 41 Used as a thinner and equipment cleaner for certain Interplate products at higher temperatures. |
|---|
GTA822
| 0.85 26 | 79 Used as an equipment cleaning solvent for a range of products. |
|---|
GTA840
| 0.83 17 | 63 Used as a thinner and equipment cleaning solvent for certain Interplate products at lower temperatures. |
|---|
GTA853
| 0.82 15 | 59 Used as a thinner and equipment cleaning solvent for certain Interline products. |
|---|
GTA991
| 0.94 43 | 109 Used as a thinner and equipment cleaning solvent for certain water-borne products. |
|---|
5822
| 0.84 32 | 90 Used as a thinner and equipment cleaning solvent for certain epoxy MIL-SPEC products in North America. |
|---|
7754D is used as the non-slip aggregate for the Interzone 1000 coating system.
Note: For specific recommendations, refer to the technical data sheet of each product.
The US Environmental Protection Agency (EPA) defines almost all solvents, including all those contained here, as photochemically reactive. Excluded solvents include methanol, ethanol, acetone and some halogenated solvents such as methylene chloride.
All work connected with the application and use of this product shall be carried out in accordance with national standards and regulations on health, safety and environmental protection.
Before using this product, obtain, read and follow the health and safety information provisions of the product's Material Safety Data Sheet. Read and observe all precautions on the Material Safety Data Sheet and the packaging container labels. Do not use this product if these warnings and provisions are not fully understood or cannot be strictly observed. During application and drying of this product, appropriate ventilation and precautionary measures must be adopted to control solvent vapour concentration within safe limits, so as to prevent the risk of poisoning or oxygen deficiency. Take protective measures to avoid skin and eye contact with this product (e.g. gloves, goggles, face masks, barrier cream, etc.). Specific safety measures depend on the application method and working environment.
: / - 1-800-854-6813 - (44) 191 4696111. and (44) 2076359191 - (532)838 89090 - and
Due to the use of local solvents, flash point and specific gravity may differ slightly from the figures above.
Please consult INTERNATIONAL.
The information given in this product data sheet is not exhaustive. Anyone who uses, for any reason, any product other than those specifically recommended in this data sheet without first obtaining our written confirmation does so at their own risk as regards the suitability of the product for the intended purpose. Although we make every effort to ensure that all advice we give about the product (whether in this data sheet or otherwise) is correct, we cannot control the quality or condition of the substrate, nor the many factors affecting the application and use of this product. Accordingly, unless we specifically agree otherwise in writing, we accept no liability, to the maximum extent permitted by law, for any product performance problem arising, or for any loss or damage caused by use of the product. We therefore disclaim all warranties, express or implied, arising by operation of law or otherwise, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. All products supplied and all technical guidance provided are subject to our terms and conditions of sale. You should obtain a copy of this document and read it carefully. The information contained in this product data sheet may be amended at any time in the light of experience and of our continuing product development policy. Before using the product, it is the user's responsibility to check with the local INTERNATIONAL representative that the data sheet in their possession is the latest version.
This technical data sheet is also available on our websites www.international-marine.com and www.international-pc.com, and should be consistent with this document. If there is any discrepancy between this document and the version of the technical data sheet on the website, the version on the website shall prevail.
| Xhnternational | All product names mentioned in this product data sheet are trademarks of AKZONOBEL or are licensed to AKZONOBEL. |
|---|
© AkzoNobel, 2013www.international-marine.com
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory item numbers of International - GTA004 are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| GTA004 | — | 18 L |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
