Hempel High-performance Epoxy High-build 750 is an epoxy paint. Hempel High-performance Epoxy High-build 750 is recommended as a high-build, self-priming intermediate coat for offshore and other demanding environments requiring fast handling and short overcoating times. Hempel High-performance Epoxy High-build 750 is a self-priming high-solids epoxy coating combining high-performance amine and polyamide. Parameters on this page: volume solids 80 ± 2%, dry film thickness 150 µm, theoretical spreading rate 5.3 m²/L. Comparable products of the same brand: Hempel Fibre-reinforced Extra-strong Epoxy Paint 47510, Hempel Multi-purpose Epoxy High-build Paint 500 Winter Type, Hempel Multi-purpose Epoxy High-build Paint 500.
Data source: HEMPEL original Technical Data Sheet (TDS), "Hempel High-performance Epoxy High-build 750"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 80 ± 2% |
|---|---|
| Dry Film Thickness | 150 µm |
| Theoretical Spreading Rate | 5.3 m²/L |
| VOC | 192 g/L (China) |
| Density / Specific Gravity | 1.6 kg/L |
| Number of Components | Two-component |
| Flash Point | 26°C |
| Thinner | HEMPEL's Thinner 08450 |
| Colour / Appearance | Medium Grey 11480 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Paint 750
Hempel High-performance Epoxy High-build 750 is a self-priming high-solids epoxy coating combining high-performance amine and polyamide. Specially designed for offshore and severely corrosive environments, with excellent anti-corrosion performance; forms a hard, tough film ensuring lasting durability.
Hempel High-performance Epoxy High-build 750 is recommended as a high-build, self-priming intermediate coat for offshore and other demanding environments requiring fast handling and short overcoating times. This product resists mechanical stress and is suitable for new construction and maintenance, such as platforms, jackets, subsea pipelines and refineries, chemical plants etc. in severely corrosive environments. This product can also be used for maintenance work.
| Product safety | Flash point 26 °C |
|---|
| Regulations | Value |
| European Union | 192 g/L |
| USA (coatings) | 192 g/L |
| USA (regulatory) | 192 g/L |
| Canada | 192 g/L |
| China | 192 g/L |
| Hong Kong | 192 g/L |
| South Korea | 192 g/L |
VOC values may vary with colour number; refer to Section 9 of the Safety Data Sheet. Never thin beyond local environmental regulations. According to specific legislation, see the explanatory notes provided on hempel.com or the local Hempel website. This product complies with the VOC requirements of mandatory national or recommended national standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 47690 |
|---|---|
| Product components | Base 47699 |
Hardener 95069_______________________________
| Standard colour* / code | Medium Grey 11480 |
|---|
Grey 11480 Paint 750
| Volume solids | 80 ± 2% |
|---|---|
| density | 1.6 kg/L |
| Recommended dry film thickness | 150 µm |
_______________________________Mica iron oxide (MIO) colour number / code MIO light grey 1C952 light grey 1C952
| Volume solids | 80 ± 2% |
|---|---|
| density | 1.6 kg/L |
| Recommended dry film thickness | 150 µm |
- Sound areas of the existing coating should be treated by blasting or water jetting to give a dense, uniform roughness, ensuring adhesion.
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 47699 : Hardener 95069 (4.5 : 1 by volume)
Do not thin the components separately — thinning may be done after mixing. Keep thinning to a minimum. Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08450 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
HEMPEL's Thinner 08450
| Product temperature | 10°C | 20°C | 30°C |
| Pot Life | 2 h | 1 h | ¾ h |
| Pot life (spray) | 2 h | 1 h | ¾ h |
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | 5% | Nozzle pressure: 22.5 MPa; tip size: 0.48–0.58 mm |
| Brush/roller | 5% | Not applicable. |
If brush or roller application is used, multiple coats are needed to achieve the specified dry film thickness. The product requires heavy-duty spray equipment; the hose should be as short as possible. To reduce dry spray at high temperatures, additional thinning may be needed. At low paint temperatures, additional thinning may be needed, which will result in lower film build and slower drying. For brush or roller application, a suitable thinner or brushing agent may be used as needed. Spray parameters are indicative and can be adjusted according to site conditions. Pressure values apply to material at 20 °C. (*Consult the company representative if other application methods are needed!)
| Specification range | Low | High | Recommended |
| Wet Film Thickness | 125 µm | 313 µm | 188 µm |
| Theoretical Spreading Rate | 8 m²/L | 3.2 m²/L | 5.3 m²/L |
To achieve optimum performance, avoid excessive film thickness. Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval.
| Surface temperature | -10°C | 0°C | 10°C | 20°C |
| Touch Dry | 8 h | 4 | 2 | 1 |
| Hard Dry | 32 h | 16 | 8 | 3 |
| Fully cured | 56 days | 28 | 14 | 7 |
Measured at 150 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | -10°C | 0°C | 10°C | 20°C | |
| Atmospheric, severe | |||||
|---|---|---|---|---|---|
| HEMPEL High-Performance High-Build Epoxy 750 | Minimum | 23 h | 11 h | 5 h | 2½ h |
| Maximum | 60 days | 30 days | |||
| HEMPEL's Polyurethane Mastic Topcoat 55610 | Minimum | 23 h | 11 h | 5 h | 2½ h |
| Maximum | 14 days | 7 days | |||
| Atmospheric, moderate | |||||
| HEMPEL High-Performance High-Build Epoxy 750 | Minimum | 23 h | 11 h | 5 h | 2½ h |
| Maximum | 60 days | 30 days | |||
| HEMPEL's Polyurethane Mastic Topcoat 55610 | Minimum | 23 h | 11 h | 5 h | 2½ h |
| Maximum | 14 days | 7 days | |||
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
- Epoxy coatings have an inherent tendency to chalk, fade and discolour; this does not affect coating performance.
| Ambient temperature | 25°C |
| Binder | 24 months |
| Curing agent | 12 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| GWP (Global Warming Potential) | 5.6 g CO₂e/m² |
|---|
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
