HEMPEL Multifunctional Epoxy High Build 500 Winter Grade belongs to Epoxy. Where rapid handling and short recoating times are required, HEMPEL Multifunctional Epoxy High Build 500 (Winter Grade) is recommended as a high-build intermediate coat in high-performance coating systems. When used as part of a pre-specified paint system, the product complies with the requirements of 2019 ISO 12944 Part 5. Parameters on this page: volume solids 85 ± 2%, dry film thickness 150 µm, theoretical spreading rate 5.7 m²/L. Comparable models from the same brand: HEMPEL Fibre-reinforced Epoxy 47510, HEMPEL Multifunctional Epoxy High Build 500, HEMPEL Multifunctional Epoxy High Build 500 Summer Grade.
Parameter source: HEMPEL original technical data sheet (TDS) “HEMPEL Multifunctional Epoxy High Build 500 Winter Grade”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 85 ± 2% |
|---|---|
| Dry Film Thickness | 150 µm |
| Theoretical Spreading Rate | 5.7 m²/L |
| VOC | 192 g/L (China) |
| Density / Specific Gravity | 1.4 kg/L |
| Number of Components | Two-component |
| Flash Point | 26°C |
| Thinner | HEMPEL's Thinner 08450 |
| Colour / Appearance | Brown-red 50630 ** |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Coating 500 (winter grade)
HEMPEL Multifunctional Epoxy High Build 500 (Winter Grade) is a fast-drying high-solids epoxy/epoxy resin coating. It provides hard abrasion-resistant protection and long-lasting barrier protection in coating systems, suitable for severely corrosive environments. When used as part of a pre-specified paint system, the product complies with the requirements of 2019 ISO 12944 Part 5.
Where rapid handling and short recoating times are required, HEMPEL Multifunctional Epoxy High Build 500 (Winter Grade) is recommended as a high-build intermediate coat in high-performance coating systems. Due to its extremely fast drying (twice that of comparable competitors), it is highly suitable for projects requiring rapid production. The product may also be used as a self-priming coating layer and as a topcoat in heavy-duty coating systems.
The product is suitable for year-round use and can be used at temperatures as low as -10⁰C [14⁰F].
- When used as part of a specified coating system, meets ISO 12944 requirements. Part 6, C5 / Im2; Part 9, CX / Im4.
Edition no. 6, System 1, 7B.
| Product safety | Flash point 26 °C |
|---|
| Regulations | Value |
| European Union | 192 g/L |
| USA (coatings) | 192 g/L |
| USA (regulatory) | 192 g/L |
| Canada | 192 g/L |
| China | 192 g/L |
| Hong Kong | 192 g/L |
| South Korea | 192 g/L |
VOC values may vary with colour; refer to Section 9 of the Safety Data Sheet. Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 45953 |
|---|---|
| Product components | Base 45959 |
Curing agent 95093_______________________________
| Standard colour* / code | Brown-red 50630 ** |
|---|
| Volume solids | 85 ± 2% |
|---|
| density | 1.4 kg/L |
|---|---|
| Recommended dry film thickness | 150 µm |
_______________________________
| Aluminium colour / code | Aluminium Grey 19871 |
|---|
Refer to the Hempel Guide for Aluminium-containing Coatings.
| Volume solids | 81 ± 2% |
|---|---|
| density | 1.4 kg/L |
| Recommended dry film thickness | 150 µm |
- Stainless steel, aluminium and other non-ferrous metals and alloys: use a non-metallic blast medium (e.g. corundum, garnet). Sweep blast to obtain a uniform, dense, well-defined profile without bare spots.
- In some cases, galvanised steel and stainless steel do not require surface roughening. Consult Hempel for advice.
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 45959 : Curing agent 95093 (4 : 1 by volume)
Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08450 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
HEMPEL's Thinner 08450
| Product temperature | 10°C | 20°C | 30°C |
| Pot Life | 2½ h | 1 h | ½ h |
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | 5% | Nozzle pressure: 22.5 MPa; tip size: 0.48–0.58 mm |
| Brush/roller | 5% | Not applicable. |
If brush or roller application is used, several coats may be required to achieve the specified dry film thickness. Spray parameters are indicative and may be adjusted to suit site conditions. Pressure figures apply to the material at 20 °C. (*For other application methods, consult the company representative.)
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 100 µm | 250 µm | 150 µm |
| Wet Film Thickness | 120 µm | 290 µm | 175 µm |
| Theoretical Spreading Rate | 8.5 m²/L | 3.4 m²/L | 5.7 m²/L |
Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated.
This will change the application rate, drying and curing times and recoating intervals. To obtain optimal performance, avoid excessive film thickness.
paint, epoxy primer, polyurethane topcoat
| Surface temperature | -10°C | 0°C | 10°C | 20°C |
| Touch Dry | 13 h | 5½ | 2½ | 1 |
| Surface Dry | 24 h | 12 | 6 | 3 |
| Hard Dry | 33 h | 16 | 8 | 3½ |
Measured at 150 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | -10°C | 0°C | 10°C | 20°C | |
| Atmospheric, moderate | |||||
|---|---|---|---|---|---|
| HEMPEL Multifunctional Epoxy High-Build 500 (Winter Grade) | Minimum | 27 h | 13 h | 6 h | 3 h |
| Maximum | Extended* | Extended | |||
| HEMPEL's Polyurethane Mastic Topcoat 55610 | Minimum | 27 h | 13 h | 6 h | 3 h |
| Maximum | 40 days | 20 days | |||
| Atmospheric, severe | |||||
| HEMPEL Multifunctional Epoxy High-Build 500 (Winter Grade) | Minimum | 27 h | 13 h | 6 h | 3 h |
| Maximum | 60 days | 30 days | |||
| HEMPEL's Polyurethane Mastic Topcoat 55610 | Minimum | 27 h | 13 h | 6 h | 3 h |
| Maximum | 10 days | 5 days | |||
| Immersion | |||||
| HEMPEL Multifunctional Epoxy High-Build 500 (Winter Grade) | Minimum | 27 h | 13 h | 6 h | 3 h |
| Maximum | 60 days | 30 days | |||
For products of the same generic chemical composition, recoat times are for reference only.
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C | 35°C |
| Binder | 24 months | 16 months |
| Curing agent | 24 months | 16 months |
Shelf life is the period from the date of manufacture while the product is stored in its original, unopened containers. After this period, the product quality shall be re-tested. Always check the best-before or expiry date on the label.
- Store the product in accordance with local law at temperatures not exceeding 40 °C [104 °F], away from direct sunlight and direct exposure to rain or snow.
For more information, refer to the Hempel website hempel.com or the local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
