Hempel's Thin-Film High-Solids Epoxy Coating 650 belongs to epoxy coatings. Hempel's Thin-Film High-Solids Epoxy Coating 650 is recommended as a self-priming primer or intermediate coat for areas requiring low VOC and high corrosion protection performance. Hempel's Thin-Film High-Solids Epoxy Coating 650 is a high-solids epoxy coating for offshore containers, providing high corrosion protection and impact resistance. Parameters on this page: volume solids 85 ± 2%, dry film thickness 80 µm, theoretical spreading rate 11 m²/L. Comparable products from the same brand: Hempel's Fibre-Reinforced Epoxy 47510, Hempel's Multi-Purpose Epoxy High-Build 500 Winter Grade, Hempel's Multi-Purpose Epoxy High-Build 500.
Parameter source: HEMPEL original Technical Data Sheet (TDS) \"Hempel's Thin-Film High-Solids Epoxy Coating 650\"; values such as spreading rate are converted from TDS parameters, for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 85 ± 2% |
|---|---|
| Dry Film Thickness | 80 µm |
| Theoretical Spreading Rate | 11 m²/L |
| VOC | 118 g/L (China) |
| Density / Specific Gravity | 1.4 kg/L |
| Number of Components | Two-component |
| Flash Point | 27°C |
| Colour / Appearance | Pure White 10170 ** |
| Gloss | Semi-gloss |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Coating 650
Hempel's Thin-Film High-Solids Epoxy Coating 650 is a high-solids epoxy coating for offshore containers, providing high corrosion protection and impact resistance.
This product is specifically designed for oven curing on container production lines.
Hempel's Thin-Film High-Solids Epoxy Coating 650 is recommended as a self-priming primer or intermediate coat for areas requiring low VOC and high corrosion protection performance. It can be used with subsequent solvent-borne or water-borne topcoats.
| Product safety | Flash point 27 °C |
|---|
| Regulations | Value |
| European Union | 156 g/L |
| USA (coatings) | 156 g/L |
| USA (regulatory) | 156 g/L |
| China | 118 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 45330 |
|---|---|
| Product components | Base 45339 |
Hardener 95333
| Standard colour* / code | Pure White 10170 ** |
|---|
Grey-white 10170
| Gloss | Semi-gloss |
|---|---|
| Volume solids | 85 ± 2% |
| density | 1.4 kg/L |
| Recommended dry film thickness | 80 µm |
Base 45339 : Hardener 95333 (1.8 : 1 by volume)
Stir thoroughly before use.
Thinner
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
|---|
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | No thinning required | Nozzle pressure: 25 MPa Nozzle orifice size: 0.33–0.43 mm |
| Air Spray | No thinning required | Not applicable. |
Do not thin individual components - thinning may be carried out after mixing. Spray parameters are indicative and may be adjusted to site conditions. Pressure values apply to material at 20°C. (*Consult the company representative for other application methods.)
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 70 µm | 110 µm | 80 µm |
| Wet Film Thickness | 82 µm | 129 µm | 94 µm |
| Theoretical Spreading Rate | 12 m²/L | 7.7 m²/L | 11 m²/L |
For further information, refer to Hempel's specifications.
| Ambient temperature | 25°C |
| Binder | 24 months |
| Curing agent | 36 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 7.1 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
