Hempel's Extra-strong Epoxy Paint 530 is an epoxy coating. Hempel's Extra-strong Epoxy Paint 530 is recommended as a heavy-duty anticorrosive coating for aggressive corrosive environments such as splash zones, or permanent immersion. Hempel's Extra-strong Epoxy Paint 530 is a self-priming high-build modified epoxy resin coating that cures to an abrasion- and corrosion-resistant coating. Parameters on this page: volume solids 90 ± 2%; dry film thickness 500 µm; theoretical spreading rate 1.8 m²/L. Comparable products from the same brand: Hempel's Fibre-reinforced Strong Epoxy 47510, Hempel's Multipurpose Epoxy High-build 500 Winter-grade, Hempel's Multipurpose Epoxy High-build 500.
Source: HEMPEL original technical data sheet (TDS) 'Hempel's Extra-strong Epoxy Paint 530'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 90 ± 2% |
|---|---|
| Dry Film Thickness | 500 µm |
| Theoretical Spreading Rate | 1.8 m²/L |
| VOC | 134 g/L (China) |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Flash Point | 27°C |
| Thinner | HEMPEL's Thinner 08450 |
| Colour / Appearance | Light grey / light grey 11150 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Hempel's Extra-strong Epoxy Paint 530 is a self-priming high-build modified epoxy resin coating that cures to an abrasion- and corrosion-resistant coating. Suitable for early immersion, continuing to cure underwater. The product is available with and without glass flake.
Hempel's Extra-strong Epoxy Paint 530 is recommended as a heavy-duty anticorrosive coating for aggressive corrosive environments such as splash zones, or permanent immersion. The product can also be used as a self-priming surface-tolerant coating layer and as a topcoat in heavy-duty coating systems.
- Third-party verified, product-specific Environmental Product Declaration (Type III EPD, ISO 14025, EN 15804)
Edition 7, System 7A, 7B.
| Product safety | Flash point 27 °C |
|---|
| Regulations | Value |
| European Union | 134 g/L |
| USA (coatings) | 134 g/L |
| USA (regulatory) | 134 g/L |
| China | 134 g/L |
| South Korea | 134 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 45500 |
|---|---|
| Product components | Base 45509 |
Hardener 95505_______________________________
| Standard colour* / code | Light grey / light grey 11150 |
|---|---|
| Volume solids | 90 ± 2% |
1.5 kg/L
| Recommended dry film thickness | 500 µm |
|---|
_______________________________
| Glass flake version / code | Light grey 11154 |
|---|---|
| Volume solids | 90 ± 2% |
1.5 kg/L
| Recommended dry film thickness | 500 µm |
|---|
- Abrasive blast clean to Sa 2½ (ISO 8501-1) / SP 10 (SSPC) / NACE No.2 minimum.
For further details, refer to the separate Hempel document Surface Preparation Guide.
Base 45509 : Hardener 95505 (4:1 by volume)
| Thinner | HEMPEL's Thinner 08450 |
|---|---|
| Cleaning solvent | HEMPEL's Tool Cleaner 99610 |
| Product temperature | 10°C | 20°C | 30°C |
| Pot Life | 2 h | 1 h | ½ h |
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | 5% | Nozzle pressure: 25 MPa; tip size: 0.64–0.79 mm |
| Brush/roller | 8% | - |
If brush or roller application is used, multiple coats are required to achieve the specified dry film thickness. For brush or roller application, a suitable thinner or brushing agent may be used as required. Spray parameters are indicative and may be adjusted to site conditions. Pressure figures apply to material at 20 °C. (*For other application methods, consult the company representative.)
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 175 µm | 750 µm | 500 µm |
| Wet Film Thickness | 195 µm | 834 µm | 556 µm |
| Theoretical Spreading Rate | 5.1 m²/L | 1.2 m²/L | 1.8 m²/L |
| Surface temperature | -5°C | 10°C | 20°C | 30°C |
| Touch Dry | 15 h | 6 | 3 | 1½ |
| Hard Dry | 43 h | 14 | 7 | 4 |
| Fully cured | 10 days | 7 | 3 | 2 |
Measured at 500 µm dry film thickness under standard conditions; see Hempel's explanatory notes.
- Epoxy coatings have an inherent tendency to chalk, fade and discolour; this does not affect coating performance.
| Ambient temperature | 25°C |
| Binder | 24 months |
| Curing agent | 12 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. The shelf life stated on the product label is determined according to local climatic conditions. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 5.9 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
More information is available at the Knowledge Centre: https://www.hempel.com/knowledge-center. The following documents are in the “Technical Guidelines” section:
https://www.hempel.com/knowledge-center/technical-guidelines Hempel
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
