Hempel's Alkyd Enamel 52140 is an alkyd paint used as a topcoat. It can be applied as a topcoat in alkyd paint systems under slight to moderate corrosive environments on internal and external surfaces of steel or wooden structures. Hempel's Alkyd Enamel 52140 is a general-purpose high-gloss alkyd resin topcoat with anti-ageing properties. Parameters on this page: volume solids 46 ± 2%, dry film thickness 30 µm, theoretical spreading rate 15 m²/L. Comparable models from the same brand: Hempel's High Solids Alkyd Topcoat 52190, Hempel's Acrylic Thick Coat Topcoat 460CN, Hempel's Acrylic Enamel 5636E.
Parameter source: HEMPEL original technical data sheet (TDS) “Penguin Alkyd Enamel 52140”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 46 ± 2% |
|---|---|
| Dry Film Thickness | 30 µm |
| Theoretical Spreading Rate | 15 m²/L |
| VOC | 431 g/L (China) |
| Density / Specific Gravity | 1.1 kg/L |
| Number of Components | — |
| Flash Point | 38°C |
| Thinner | HEMPEL's Thinner 08230 |
| Colour / Appearance | White 10000 * |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Hempel's Alkyd Enamel 52140 is a general-purpose high-gloss alkyd resin topcoat with anti-ageing properties. The product is highly flexible and resistant to salt water, mineral oil spillage and other aliphatic hydrocarbons.
Complies with EU Directive 2004/42/EC, subcategory i.
Can be applied as a topcoat in alkyd paint systems under slight to moderate corrosive environments on internal and external surfaces of steel or wooden structures.
Can be used as a topcoat for equipment in engine rooms (including deckheads, main engines and auxiliary machinery).
- When used as part of the specified coating system, it is approved as a low flame-spread material. For further details, see the Declaration of Conformity at hempel.com.
| Product safety | Flash point 38 °C |
|---|
| Regulations | Value |
| European Union | 431 g/L |
| USA (coatings) | 431 g/L |
| USA (regulatory) | 431 g/L |
| Canada | 431 g/L |
| China | 431 g/L |
| Hong Kong | 431 g/L |
| South Korea | 431 g/L |
Subject to applicable legislation; see the explanatory notes on hempel.com or the local Hempel website. EU Directive 2004/42/CE. VOC values may vary by colour reference; refer to Section 9 of the safety data sheet. The product complies with the VOC requirements of mandatory or recommended national standards; for details, consult the company representative.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 52140 |
|---|---|
| Standard colour / code | White 10000 * |
Other colours are available through the company's tinting system
| Gloss | High gloss |
|---|---|
| Volume solids | 46 ± 2% |
| density | 1.1 kg/L |
| Recommended dry film thickness | 30 µm |
For further details, refer to the separate Hempel document Surface Preparation Guide.
Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08230 |
|---|---|
| Cleaning solvent | HEMPEL's Thinner 08230 |
| Tools | Maximum thinning volume | Application parameters |
| Airless Spray | 5% | Nozzle pressure: 15 MPa; tip size: 0.46 mm |
| Air Spray | 15% | Not applicable. |
| Brush/roller | 5% | Not applicable. |
If brush or roller application is used, multiple coats are required to achieve the specified dry film thickness. To comply with Korean VOC regulations, thinning is limited to a maximum concentration of 1%. Spray parameters are indicative and may be adjusted according to site conditions. Pressure values apply to material at 20 °C. (*If other application methods are required, consult the company representative!).
| Specification range | Low | High | Recommended |
| Wet Film Thickness | 54 µm | 86 µm | 65 µm |
| Theoretical Spreading Rate | 19 m²/L | 12 m²/L | 15 m²/L |
Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval. To achieve optimum performance, avoid excessive film thickness.
- Previous Coat: Recommended products: Hempel's Alkyd Anticorrosive Primer 12050, Hempel's Alkyd High Build Primer 13200, Hempel's Alkyd Intermediate 42460 - Subsequent Coat: None.
| Surface temperature | 10°C | 20°C | 30°C | 40°C |
| Touch Dry | 6 h | 2 | 1 | ½ |
| Hard Dry | 14 h | 4 | 2 | 1½ |
Determined under standard conditions at a dry film thickness of 30 µm; refer to Hempel's explanatory notes. This product also reflects the natural tendency of alkyd resins to fade. Poor ventilation, exposure to chemicals, high temperatures and low light conditions may accelerate fading.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | 10°C | 20°C | 30°C | 40°C | |
| Atmospheric, moderate | |||||
|---|---|---|---|---|---|
| HEMPEL Alkyd Enamel 52140 | Minimum | 16 h | 8 h | 6 h | 4 h |
| Maximum | 9 days | 5 days | 4 days | 60 h | |
For products of the same generic chemical composition, recoat times are for reference only.
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
|---|---|
| Product | 60 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| GWP (Global Warming Potential) | 8.7 g CO₂e/m² |
|---|
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
The factory article numbers for Hempel's Alkyd Enamel 52140 are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 52140-37240 RAL5015 | — | 20 L |
| 52140-B05 | — | 20 L |
| 52140-11480 Grey | — | 20 L |
This model has a total of3item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
