HEMPEL Brand Pure Acrylic Road Marking Paint 29680 is an acrylic paint. It can be used for long-term marking on asphalt or concrete road surfaces, including urban and highway pavements. HEMPEL High-performance Acrylic Road Marking Paint 29680 is a fast-drying road marking coating based on a specially formulated polymer. Parameters on this page: volume solids 47 ± 2%, dry film thickness 140 µm, theoretical spreading rate 3.3 m²/L. Comparable products of the same brand: HEMPEL Acrylic High-build Paint 46410, HEMPEL Acrylic High-build Paint 4641C, HEMPEL Acrylic High-build Paint 4641S.
Parameter source: HEMPEL manufacturer's Technical Data Sheet (TDS) "HEMPEL Brand Pure Acrylic Road Marking Paint 29680"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 47 ± 2% |
|---|---|
| Dry Film Thickness | 140 µm |
| Theoretical Spreading Rate | 3.3 m²/L |
| VOC | 464 g/L (China) |
| Density / Specific Gravity | 1.5 kg/L |
| Number of Components | — |
| Flash Point | 21°C |
| Thinner | HEMPEL's Thinner 08080 |
| Colour / Appearance | White 10000 |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
29680
HEMPEL High-performance Acrylic Road Marking Paint 29680 is a fast-drying road marking coating based on a specially formulated polymer. The product has fast drying, convenient application, bright colour and high visibility, forms a hard film, and features good adhesion, abrasion resistance, water resistance, alkali resistance and weather resistance, meeting the relevant requirements of Ministry of Transport standard JT/T280-2004.
It can be used for long-term marking on asphalt or concrete road surfaces, including urban and highway pavements.
It can also be used for markings on airport runways, metal guardrails and concrete barriers.
| Product safety | Flash point 21°C |
|---|
| Regulations | Value |
| European Union | 464 g/L |
| USA (coatings) | 464 g/L |
| USA (regulatory) | 464 g/L |
| China | 464 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. VOC values may vary with colour; refer to Section 9 of the Safety Data Sheet. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 29680 |
|---|---|
| Standard colour / code | White 10000 |
| Volume solids | 47 ± 2% |
| density | 1.5 kg/L |
| Recommended dry film thickness | 140 µm |
For further details, refer to the separate Hempel document Surface Preparation Guide.
Stir thoroughly before use.
| Thinner | HEMPEL's Thinner 08080 |
|---|
29680
| Tools | Application parameters |
|---|---|
| Airless Spray | Not applicable. |
If brush or roller application is used, multiple coats are required to achieve the dry film thickness required by the specification. Keep thinner addition to a minimum. Spray parameters are indicative and may be adjusted to site conditions. Pressure values apply to material at 20°C. (*For other application methods, consult a company representative.)
| Specification range | Low | High | Recommended |
| Wet Film Thickness | 210 µm | 400 µm | 300 µm |
| Theoretical Spreading Rate | 4.7 m²/L | 2.5 m²/L | 3.3 m²/L |
To achieve optimum performance, avoid excessive film thickness. Depending on the end use and service area, the product may be specified at film thicknesses other than those indicated. This will alter the spreading rate, drying and curing times and recoat interval.
- If brush or roller application is used, more coats are required to achieve the specified dry film thickness.
| Surface temperature | - |
| Touch Dry | 15 min |
| Surface Dry | 15 min |
Dry film thickness measured under standard conditions: 140 µm; see HEMPEL explanatory note for details. To determine the dry state, refer to Application Specification COP FP1401-1 (dry testing for high film thickness).
Hempel's specifications supersede all guidance shown in the recoat table.
Product name
| HEMPEL Brand Pure Acrylic Road Marking | Minimum |
|---|---|
| Paint 29680 | Maximum |
For products of the same generic chemical composition, recoat times are for reference only.
For further information, refer to Hempel's specifications.
- To achieve the stated drying times, adequate ventilation during application, drying and curing is essential.
| Ambient temperature | 25°C |
|---|---|
| Product | 12 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
29680
| GWP (Global Warming Potential) | 8.5 g CO₂e/m² |
|---|
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
Internal product codes for HEMPEL Brand Pure Acrylic Road Marking Paint 29680 are as follows.Item No.is the most accurate form when ordering;Colour/colour codecorresponds to the actual colour (RAL, GSB are colour chart codes);Packaging SpecificationsFactory complete-set specification format. Colors not listed may be ordered against the colour card.
| Item No. | Colour / colour code | Packaging Specifications |
|---|---|---|
| 29680-2C041 Yellow | — | 25 KG |
This model has a total of1item numbers, all listed on this page; colours outside the table (including special colours and bulk packaging) can be confirmed by phone, delivery dates are advised according to the factory's current production schedule and stock. In the packaging specification, the "+" indicates the complete-set notation for two-component products (base + curing agent), subject to the factory specification; a "—" in the colour column denotes an auxiliary product, or that the item has no colour code in the factory system.
