Hempel's Aerogel Thermal Insulation Coating 170 is a thermal insulation coating. Hempel's Aerogel Thermal Insulation Coating 170 is used as topcoat or sealer coat over Hempel's Aerogel Thermal Insulation Coating 175. After curing, the hydrophobic layer formed prevents water ingress and retention, thereby helping to maintain reliable, stable thermal insulation performance over the service life of the coating system. Parameters on this page: volume solids 83 ± 2%, dry film thickness 1000 µm, theoretical spreading rate 0.8 m²/L. Comparable products of the same brand and type: Hempel's Anti-corrosive Coating under Insulation 56990, Hempel's Anti-corrosive Coating under Insulation 275, Hempel's Aerogel Thermal Insulation Coating 175.
Source of parameters: HEMPEL manufacturer's Technical Data Sheet (TDS) "Hempel's Aerogel Thermal Insulation Coating 170"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 83 ± 2% |
|---|---|
| Dry Film Thickness | 1000 µm |
| Theoretical Spreading Rate | 0.8 m²/L |
| VOC | 0 g/L (China) |
| Density / Specific Gravity | 0.7 kg/L |
| Number of Components | — |
| Flash Point | 100°C |
| Colour / Appearance | White 10000 * |
| Gloss | Flat |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Coating 170
Hempel's Aerogel Thermal Insulation Coating 170 is a waterborne thermal insulation coating based on aerogel technology and a special acrylic resin blend. After curing, the hydrophobic layer formed prevents water ingress and retention, thereby helping to maintain reliable, stable thermal insulation performance over the service life of the coating system.
Hempel's Aerogel Thermal Insulation Coating 170 is used as topcoat or sealer coat over Hempel's Aerogel Thermal Insulation Coating 175. The smoother appearance reduces dust accumulation. It can also be used as a thermal insulation coating for personnel protection or to reduce heat build-up from solar radiation.
| Product safety | Flash point 100 °C |
|---|
| Regulations | Value |
| European Union | 0 g/L |
| USA (coatings) | 0 g/L |
| USA (regulatory) | 0 g/L |
| Canada | 0 g/L |
| China | 0 g/L |
| Hong Kong | 0 g/L |
| South Korea | 10 g/L |
Subject to specific legislation; see the explanatory notes on the Hempel website hempel.com or your local Hempel website. VOC values may vary with colour; refer to Section 9 of the Safety Data Sheet. This product complies with the VOC requirements of national mandatory or recommended standards; consult the company representative for details.
Handle with care. Before and during use, observe the safety labels on the packaging and paint containers and comply with all local and national safety regulations. Consult the Hempel Safety Data Sheet and Product Data Sheet for the product at all times.
For professional use only.
| Product code | 58454 |
|---|---|
| Standard colour / code | White 10000 * |
| Gloss | Flat |
| Volume solids | 83 ± 2% |
| density | 0.7 kg/L |
| Recommended dry film thickness | 1000 µm |
For further details, refer to the separate Hempel document Surface Preparation Guide.
Stir thoroughly before use.
Thinner
Potable water
Cleaning solvent
| Tools | Maximum thinning volume | Application parameters |
| Air-assisted airless spray | 5% | Nozzle pressure: 2.5 MPa; tip size: 4.06 mm |
| Brush | 5% | Not applicable. |
| Roller application | 5% | Not applicable. |
| Airless Spray | 5% | Nozzle pressure: 18 MPa; nozzle orifice size: 0.58 mm |
Spray parameters are indicative and may be adjusted to suit site conditions. Pressure figures apply to the material at 20 °C. (*For other application methods, consult the company representative.)
| Specification range | Low | High | Recommended |
| Dry Film Thickness | 500 µm | 2000 µm | 1000 µm |
| Wet Film Thickness | 604 µm | 2418 µm | 1209 µm |
| Theoretical Spreading Rate | 1.6 m²/L | 0.4 m²/L | 0.8 m²/L |
Depending on the application and service area, film thicknesses other than those indicated may be specified. This will alter the spreading rate, drying and curing times and the recoat interval. Checking paint consumption against the area improves film thickness control. Uniform attainment of the specified minimum dry film thickness is essential.
| Surface temperature | 10°C | 20°C | 30°C | 40°C |
| Surface Dry | 90 min | 60 | 20 | 12 |
| Hard Dry | 3¼ h | 2¼ | 1½ | 1¼ |
| Dry to walk-on | 12 h | 6 | 4 | 3 |
| Fully cured | 5 days | 4 | 3 |
Dry film thickness 1000 µm measured under standard conditions; see Hempel's explanatory notes for details.
Hempel's specifications supersede all guidance shown in the recoat table.
| Product name | 10°C | 20°C | 30°C | 40°C | |
| Atmospheric, severe | |||||
|---|---|---|---|---|---|
| HEMPEL Aerogel Thermal Insulation Coating 170 | Minimum | 48 h | 36 h | 24 h | |
| Maximum | Extendable* | ||||
| HEMPEL's Water-borne Acrylic Mastic Enamel 58030 | Minimum | 48 h | 36 h | 24 h | |
| Maximum | Extendable* | ||||
Extendable* Depending on the actual exposure conditions, the coated surface may be recoated after an extended time. Contact your local Hempel representative for advice.
For further information, refer to Hempel's specifications.
| Ambient temperature | 25°C |
|---|---|
| Product | 24 months |
When stored in unopened original containers, shelf life is counted from the date of production. Thereafter, the product quality must be re-inspected. Storage at high temperatures may shorten the shelf life. For advice, consult Hempel.
- Store the product in accordance with the Safety Data Sheet, label and local regulations. Keep containers in a dry, cool, well-ventilated place away from heat and sources of ignition. Keep containers tightly closed. Handle with care.
| Dry Film Thickness | 1 µm | |
| GWP (Global Warming Potential) | 1.9 g CO₂e/m² |
Carbon footprint is based on a 1 µm dry film thickness formed over a surface area of 1 m².
The scope includes raw materials, transport to the Hempel factory, the Hempel production process, and any volatile organic compounds (VOC) emitted during and after use of the product.
Calculated based on the standard colours defined in this PDS. Values may vary with colour.
For further information, refer to the Hempel website (https://www.hempel.com/service-and-support/technical-guidelines) or your local Hempel website:
| Number | Document description | Location/Notes |
| 3. | PDS | This document |
datasheet, which is also available for download at www.hempel.com.
This Product Data Sheet (“PDS”) relates to the product supplied (the “Product”), and its content is updated from time to time. Accordingly, the buyer/applicator should refer to the PDS supplied with the relevant batch of product (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guides shown below, which are also available for download from the “Products” page of the Hempel website (www.hempel.com) (hereinafter the “Supplementary Documents”):
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If the information in the PDS and the supplementary documents is inconsistent, the information shall take precedence in the order listed above. In this case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety information accompanying each product. Hempel accepts no liability for any defects arising from application not carried out fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other relevant documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, supply of the product and all technical support are subject to Hempel's General Conditions of Sale, Delivery and Service.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
