Hempel's Epoxy Sealer 05970 is an epoxy coating. 12 m²/L at 50 µm, depending on the porosity of the surface. *This product complies with the VOC requirements of the relevant national mandatory or recommended standards; consult the company representative for details. Hempel's Epoxy Sealer 05970 is a low-viscosity two-component epoxy clear varnish. Parameters on this page: volume solids 65 ± 2%; theoretical spreading rate 12 m²/L; number of components: two. Comparable products from the same brand: Hempel's Fibre-reinforced Strong Epoxy 47510, Hempel's Multipurpose Epoxy High-build 500 Winter-grade, Hempel's Multipurpose Epoxy High-build 500.
Source: HEMPEL original technical data sheet (TDS) 'Hempel's Epoxy Sealer 05970'. Spreading rate and other values converted from the TDS; for reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 65 ± 2% |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | 12 m²/L |
| VOC | <320 g/L |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | 08450(10%) |
| Mixing Ratio | Base 05979 : curing agent 95960 = 1:1 (by volume) |
| Colour / Appearance | Clear/00000 |
Features: - high application performance on porous substrates;
| Colour/shade: paint | Colour/shade: topcoat: | Clear/00000, flat |
| Volume solids: | 65±2% | |
| Flash | : | 28°C |
| Ratio | gravity: | 1.0 kg/L |
| Touch dry: | 2–4 h (20 °C) | |
| VOC content (V.O.C.): | <320 g/L |
| Thinner (max; by volume): | 08450(10%) |
| Pot life: | 2 h (20 °C) |
| Nozzle tip size: | 0.43–0.53 mm |
| Tool cleaning: | Hempel's Thinner 08450 |
| Film thickness: | Not applicable |
| Recoat interval: | Min: 4 h (20 °C); max: none (see note) or per local safety regulations. |
| Description | Hempel's Epoxy Sealer 05970 is a low-viscosity two-component epoxy clear varnish. |
|---|---|
| Use | Used as a sealer and strengthening coating before application of the coating system, for porous substrates such as cement, concrete, brickwork and other |
building materials, especially suitable for cement floors.
| Certificates | Complies with EU Directive 2004/42/EC, subcategory j. |
|---|---|
| Theoretical Spreading Rate | 12 m²/L at 50 µm, depending on the porosity of the surface |
* This product complies with the VOC requirements of mandatory or recommended national standards; for details, consult the company representative.
| Mixing ratio | Base 05979 : curing agent 95960 = 1:1 (by volume) |
|---|---|
| Recommended method | Airless spray (*For other application methods, consult the company representative!) |
| Spray output pressure | 10.0 MPa (airless spray data for reference only; may be adjusted in practice.) |
| Safety | Handle this product with care. Before and during use, observe the precautions on the packaging label. In addition, comply with the relevant national |
None, or apply as specified.
.
| Note | : | This product is for professional use only. |
| Publication date: | June 2020 - 059900000 |
on the website (hereinafter 'supplementary documents'):
General Terms of Sale, Delivery and Service.
- Remove all laitance and other contaminants by detergent washing, then rinse with high-pressure clean water. By mechanical treatment, preferably blasting, or by acid treatment, remove laitance and loose material to form a hard, rough, even surface. Accor
| Application conditions | dingly, seal the surface with a suitable sealer per the relevant requirements. |
|---|
Thermally sprayed metal: apply this product soon after the metal coating, as it prevents contamination of the porous coating.
Apply to a dry, clean surface, with the surface temperature above the dew point to prevent condensation. Use only under conditions in which application and curing can proceed
| Additional coat | , i.e. temperature above 0 °C and relative humidity not below 30%. The paint itself should be above 15 °C. In confined spaces |
|---|
, adequate ventilation must be provided during application and drying.
| Notes | Application: for saturating absorbent substrate surfaces. For good results, estimate the dilution of the sealer before application. |
|---|
The surface must never be glossy at any time; before applying the next coat, remove excess product by sanding, sweep blasting or similar methods.
In practice, depending on surface roughness, substrate porosity and application method, the spreading rate of this product is about 20 m²/L.
Film thickness/thinning: the actual total thinner quantity depends on temperature, substrate condition and type, and the application technique. This Product Data Sheet ('PDS') relates to the product supplied ('Product') and its content is updated from time to time. Therefore, the buyer/applicator should refer to the PDS supplied with the relevant batch (rather than an earlier version). In addition to the PDS, the buyer/applicator may receive some or all of the specifications, declarations and/or guidelines listed below, which are also available on the 'Products' page of the Hempel website (www.hempel.com)
| Number | Document description | Location/Notes |
| 1. | Technical declaration | Provides one-off specific advice for the requirements of a specific project |
| 2. | Specifications | Issued for specific projects only |
| 3. | PDS | This document |
| 4. | Explanatory notes to the PDS | Available for download at www.hempel.com, containing information related to product test parameters |
| 5. | Application guide | If available, provided at www.hempel.com |
| 6. | General technical guidelines (e.g. application and surface preparation) |
If there is any inconsistency between the PDS and the supplementary documents, the priority of the information shall follow the order above. In that case, contact the Hempel representative for clarification. In addition, the buyer/applicator must give full consideration to the relevant safety data sheet supplied with each product, which can also be downloaded from www.hempel.com.
If the product is not applied fully in accordance with the recommendations and requirements of the relevant PDS and supplementary documents, Hempel accepts no liability for any resulting defects. The information and terms in this disclaimer apply to this PDS, the supplementary documents and any other related documents provided by Hempel for this product. In addition, unless otherwise expressly agreed in writing, product supply and all technical support are subject to Hempel's 'General Sales,
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
