SKSHU (3TREES) FFX201 Fluorocarbon Thinner is an auxiliary material. It enables ideal brushing, spraying and other application performance.
Parameter source: SKSHU (3TREES) original technical data sheet (TDS) “SKSHU (3TREES) FFX201 Fluorocarbon Thinner”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | — |
|---|---|
| Dry Film Thickness | — |
| Theoretical Spreading Rate | — |
| VOC | 800 g/L |
| Density / Specific Gravity | Approx. 0.9 kg/L |
| Number of Components | — |
| Flash Point | 26°C |
| Thinner | 15 kg per drum |
| Colour / Appearance | Clear |
This product is suitable for thinning SKSHU (3TREES) solvent-borne fluorocarbon products to facilitate application. SKSHU (3TREES) fluorocarbon paints generally require no thinning and can be sprayed directly if correctly mixed or stirred as required and suitable application equipment is selected. In certain special cases, however, if sealing of the substrate or previous coat is required, or if the paint has thickened due to temperature effects, addition may be made in accordance with the thinner quantity given in the product instructions, yielding a uniform film that is also convenient to apply.
| As a general rule, | Thinner shall be added as little as possible, because excessive thinner affects the quality of the applied coating and poses a risk under VOC control. |
|---|
In some cases, certain conventional solvents may be substituted; such substitute products are outside our quality control, and we reserve the right to contest any adverse results arising from them.
for ideal brushing and spraying properties.
| Colour: | Clear |
|---|---|
| Gloss: | N/A |
| Volume solids: | N/A |
| Specific gravity: | Approx. 0.9 kg/L |
| Flash point: | 26°C |
| VOC content: | 800 g/L |
| Storage time: | Dry and cool, away from ignition sources, unlimited shelf life |
See the instructions for each specific fluorocarbon product
1. This product may be used to clean application tools used for fluorocarbon products.
2. If required, tools used for SKSHU (3TREES) fluorocarbon paints may be cleaned; do not use it to clean application tools for non-fluorocarbon paints, so as to avoid affecting subsequent application of other paints. Should this occur, contact SKSHU (3TREES) technical service personnel for resolution.
| FFX201 Fluorocarbon Thinner: | 15 kg per drum |
|---|
For the coating and its recommended thinners, see the safety sheets and the relevant Material Safety Data Sheet.
This is a solvent-borne coating/thinner; appropriate protective equipment shall be used to avoid inhaling spray mist and solvent.
In addition, avoid skin and eye contact with wet paint or thinner.
In all cases, SKSHU (3TREES) shall not be liable for any indirect, special, incidental or consequential loss of any kind arising from or in connection with the use of this product (whether based on negligence, strict liability or tort).
The information in this product data sheet is based on laboratory tests we believe to be reliable, and is provided for guidance only. SKSHU (3TREES) may revise this information at any time as experience accumulates and product development progresses.
All recommendations and advice concerning the use of this product, whether in technical documents, in response to an enquiry or otherwise, are given to the best of our knowledge and are believed to be reliable. Our products and related information are provided for industrial users possessing the necessary knowledge and practical skills, and it is the end user's responsibility to determine whether the product is suitable for the specific use. The buyer, having performed such evaluation, proceeds entirely at its own risk.
The quality and condition of the substrate on site, and the many other factors affecting product use and application, are beyond SKSHU (3TREES)'s control. SKSHU (3TREES) accepts no liability for coating quality problems caused by application environment, application process, surface preparation or personnel operation (unless otherwise provided in a written agreement).
To avoid misuse, confirm with our sales staff that the product data sheet in hand is the latest version.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
