TR606 Silicone Heat-resistant Aluminium Paint 500 °C is a heat-resistant paint, a silicone coating system. Used for protective and decorative coating of various mechanical equipment surfaces at temperatures up to 500 °C. Single can, based on modified silicone resin. Parameters on this page: dry film thickness 50 µm, theoretical spreading rate 8.18 m²/kg.
Data source: OSAKA original Technical Data Sheet (TDS), "TR606 Silicone Heat-resistant Aluminium Paint 500 °C"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45% |
|---|---|
| Dry Film Thickness | 50 µm |
| Theoretical Spreading Rate | 8.18 m²/kg |
| VOC | 473 g/L |
| Density / Specific Gravity | 1.18 kg/L |
| Number of Components | One-component |
| Thinner | OUP 102, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
| Pot Life | Unlimited |
Single can, based on modified silicone resin
Used for protective and decorative coating of various mechanical equipment surfaces at temperatures up to 500 °C, such as engines, boilers, exhaust pipes etc.
| Volume Solids | 45% |
|---|---|
| Dry Film Thickness | 50 µm |
| Theoretical Spreading Rate | 8.18 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 473 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable, but not recommended. |
| Thinner | OUP 102, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 102 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 10°C | 30 | 12 | 12 h | Unlimited |
| 23°C | 20 | 8 | 8 h | Unlimited |
| 35°C | 10 | 6 | 6 h | Unlimited |
| Storage | Store in a dry, cool place, prevent moisture ingress to avoid pressure build-up in the can. |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | Above 23 °C |
| density | 1.18 kg/L |
Steel surface: blast clean to Sa 2.5 per ISO 8501:2007, or hand or power tool clean to St 3. Keep clean and dry. Also suitable for phosphatized steel substrates.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
