A marking or identification paint for roads, bridges, tunnels, guardrails and the like. One-component marking paint, white, yellow or other colours, with excellent colour and gloss retention. Parameters on this page: dry film thickness 40 µm, theoretical spreading rate 10.2 m²/kg, number of components one.
Source: OSAKA original technical data sheet (TDS) "SMP1401 Marking Paint"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45% |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 10.2 m²/kg |
| VOC | 473 g/L |
| Density / Specific Gravity | 1.10 kg/L |
| Number of Components | One-component |
| Flash Point | 28°C |
| Thinner | OUP 110, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
One-component marking paint, white, yellow or other colours, with excellent colour and gloss retention.
A marking or identification paint for roads, bridges, tunnels, guardrails and the like. Good adhesion and weatherability.
| Volume Solids | 45% |
|---|---|
| Dry Film Thickness | 40µm |
| Theoretical Spreading Rate | 10.2 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 473 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable, but not recommended. |
| Thinner | OUP 110, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 110 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 23°C | 10 | 16 | 12 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 28°C |
| density | 1.10 kg/L |
Before application, keep all surfaces clean and dry, free from oil or grease contamination.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
