SG-JD Inorganic High-temperature Anti-oxidation Coating is a heat-resistant coating. This product is mainly used as a steel protection coating in high-temperature environments such as hot coiling of boiler drums in boiler plants and rolling processes in steel plants; it protects steel from oxidation and decarburisation. A one-component inorganic high-temperature anti-oxidation coating made from nano-scale SiO2 gel, special resin, high-temperature metallic pigment and base glaze. Parameters on this page: dry film thickness 23 µm equivalent to 100 µm wet film, theoretical spreading rate 10 m²/kg, number of components one.
Source: OSAKA original technical data sheet (TDS) "SG-JD Inorganic High-temperature Anti-oxidation Coating"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 23% |
|---|---|
| Dry Film Thickness | 23 µm corresponds to 100 µm WFT |
| Theoretical Spreading Rate | 10 m²/kg |
| VOC | 662.2 g/L |
| Density / Specific Gravity | Approx. 1.0–1.05 kg/L |
| Number of Components | One-component |
| Thinner | OUP 102, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
| Pot Life | Unlimited |
A one-component inorganic high-temperature anti-oxidation coating made from nano-scale SiO2 gel, special resin, high-temperature metallic pigment and base glaze. Dries to a film at ambient temperature and protects steel surfaces at high temperatures of 800–1250 °C.
This product is mainly used as a steel protection coating in high-temperature environments such as hot coiling of boiler drums in boiler plants and rolling processes in steel plants; it protects steel from oxidation and decarburisation. It can also be used for long-term protection of steel in high-temperature environments at 650 °C.
| Volume Solids | 23% |
|---|---|
| Dry Film Thickness | 23 µm corresponds to 100 µm WFT |
| Theoretical Spreading Rate | 10 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 662.2 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable, but not recommended. |
| Thinner | OUP 102, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 102 |
| Pot life | Unlimited |
| Drying Time | ||
| Substrate Temperature | Touch dry (h) | Hard dry (h) |
| 10°C | 4 | 48 |
| 23°C | 1.5 | 36 |
| 35°C | 1 | 24 |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | Above 24 °C |
| density | Approx. 1.0–1.05 kg/L |
Steel surfaces: blast clean to Sa2.5 of ISO 8501:2007, or clean by hand or power tool to St3. Keep clean and dry. Stir thoroughly until uniform before use.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
