The coating film provides certain anti-corrosive performance, water resistance and chemical resistance. After the film dries, it can be easily peeled off after being cut with a knife. The film remains reusable after being dissolved in solvent. Parameters on this page: dry film thickness 100 µm, theoretical spreading rate 3.46 m²/kg, number of components single-component.
Parameter source: OSAKA original technical data sheet (TDS) “SAP1301 Strippable Coating”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 35% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 3.46 m²/kg |
| VOC | 560 g/L |
| Density / Specific Gravity | Approx. 1.05 kg/L |
| Number of Components | One-component |
| Flash Point | 28°C |
| Thinner | OUP 111, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
Single-component, strippable
Suitable for temporary protection of metal surfaces, or for protecting non-machined surfaces during chemical milling or electroplating. The coating film provides certain anti-corrosive performance, water resistance and chemical resistance. After the film dries, it can be easily peeled off after being cut with a knife. The film remains reusable after being dissolved in solvent.
| Volume Solids | 35% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 3.46 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 560 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended |
| Brush or roller | Recommended |
| Conventional spray | Suitable, but not recommended. |
| Thinner | OUP 111, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 111 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 23°C | 10 | 4 | 4 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 28°C |
| density | Approx. 1.05 kg/L |
Keep the surface to be coated clean, dry and smooth.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
