PL096 Acrylic Amino Baking Paint is an acrylic paint. Used for industrial equipment, metal castings, vehicles, hardware and office supplies. A single-component acrylic amino baking paint in various colours, with the advantages of high gloss, high hardness, good abrasion resistance and good mechanical properties, containing no heavy metal elements, environmentally friendly and easy to apply. Parameters on this page: dry film thickness 20–30 µm, theoretical spreading rate 16.7 m²/kg, components single-component.
Data source: OSAKA original Technical Data Sheet (TDS), "PL096 Acrylic Amino Baking Paint"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 46% |
|---|---|
| Dry Film Thickness | 20–30 µm |
| Theoretical Spreading Rate | 16.7 m²/kg |
| VOC | 448 g/L |
| Density / Specific Gravity | 1.10 kg/L |
| Number of Components | One-component |
| Thinner | OUP 209, recommended addition 20%–30% |
| Mixing Ratio | One-component |
| Drying Time | Baking temperature, hard dry (minutes) |
A single-component acrylic amino baking paint in various colours, with the advantages of high gloss, high hardness, good abrasion resistance and good mechanical properties, containing no heavy metal elements, environmentally friendly and easy to apply.
For industrial equipment, metal castings, vehicles, hardware and office supplies.
| Volume Solids | 46% |
|---|---|
| Dry Film Thickness | 20–30 µm |
| Theoretical Spreading Rate | At the above volume solids and a dry film thickness of 25 µm, the spreading rate is 16.7 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 448 g/L |
| Mixing Ratio | One-component |
|---|---|
| Air Spray | Recommended |
| Electrostatic spray | Recommended |
| Thinner | OUP 209, recommended addition 20%–30%. |
| Paint equipment cleaner | OUP 209 |
| Pot life | Unlimited |
| Drying Time | Baking temperature, hard dry (minutes): 130–140 °C, 30 |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | Above 38 °C |
| density | 1.10 kg/L |
All surfaces to be coated shall be clean, dry and free from contamination. For vehicles requiring primer and intermediate coats, steel surfaces shall be blast-cleaned to Sa2.5 or power-tool cleaned to St3. Metal surfaces such as office supplies and packaging drums may be degreased and derusted with special cleaners.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
