PL095 Alkyd Amino Baking Paint belongs to alkyd paints. Used for industrial equipment, metal castings, vehicles, hardware and office supplies. A one-component alkyd amino baking paint, available in various colours, featuring high gloss, high hardness and good mechanical properties, free of any heavy metal pigments, environmentally friendly and easy to apply. Parameters on this page: dry film thickness 20–30 µm, theoretical spreading rate 17.5 m²/kg, number of components one-component.
Parameter source: OSAKA original technical data sheet (TDS) “PL095 Alkyd Amino Baking Paint”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 48% |
|---|---|
| Dry Film Thickness | 20–30 µm |
| Theoretical Spreading Rate | 17.5 m²/kg |
| VOC | 448 g/L |
| Density / Specific Gravity | 1.10 kg/L |
| Number of Components | One-component |
| Thinner | OUP 209, recommended addition 20%–30% |
| Mixing Ratio | One-component |
| Drying Time | Baking temperature, hard dry (minutes) |
A one-component alkyd amino baking paint, available in various colours, featuring high gloss, high hardness and good mechanical properties, free of any heavy metal pigments, environmentally friendly and easy to apply.
For industrial equipment, metal castings, vehicles, hardware and office supplies.
| Volume Solids | 48% |
|---|---|
| Dry Film Thickness | 20–30 µm |
| Theoretical Spreading Rate | At the above volume solids and a dry film thickness of 25 µm, the spreading rate is 17.5 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 448 g/L |
| Mixing Ratio | One-component |
|---|---|
| Air Spray | Recommended |
| Electrostatic spray | Recommended |
| Thinner | OUP 209, recommended addition 20%–30%. |
| Paint equipment cleaner | OUP 209 |
| Pot life | Unlimited |
| Drying Time | Baking temperature, hard dry (minutes): 130–140 °C, 30 |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | Above 38 °C |
| density | 1.10 kg/L |
All surfaces to be coated shall be clean, dry and free from contamination. For vehicles requiring primer and intermediate coats, steel surfaces shall be blast-cleaned to Sa2.5 or power-tool cleaned to St3. Metal surfaces such as office supplies and packaging drums may be degreased and derusted with special cleaners.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
