PL091 Waterborne Amino Baking Enamel is a waterborne coating. For industrial equipment, metal castings, vehicles, hardware and office supplies. A one-component waterborne metal amino baking enamel with high gloss, high hardness and good mechanical properties, free of heavy-metal pigments, eco-friendly, flame-retardant, safe and easy to apply. Parameters on this page: dry film thickness 20–30 µm, theoretical spreading rate 15.6 m²/kg, number of components one.
Source: OSAKA original technical data sheet (TDS) "PL091 Waterborne Amino Baking Enamel"; spreading rate and other values are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45% |
|---|---|
| Dry Film Thickness | 20–30 µm |
| Theoretical Spreading Rate | 15.6 m²/kg |
| VOC | — |
| Density / Specific Gravity | 1.10 kg/L |
| Number of Components | One-component |
| Thinner | Clean fresh water |
| Mixing Ratio | One-component |
| Colour / Appearance | White, black or other colours specified by the customer |
A one-component waterborne metal amino baking enamel with high gloss, high hardness and good mechanical properties, free of heavy-metal pigments, eco-friendly, flame-retardant, safe and easy to apply.
For industrial equipment, metal castings, vehicles, hardware and office supplies.
| Colour | White, black or other colours specified by the customer |
|---|---|
| Volume Solids | 45% |
| Typical dry film thickness | 20–30 µm |
| Theoretical Spreading Rate | 15.6 m²/kg (based on 25 µm dry film thickness) |
| Practical Spreading Rate | Allowing a suitable loss |
| Mixing Ratio | One-component |
|---|---|
| Air Spray | Recommended |
| Electrostatic spray | Recommended |
| Thinner | Clean fresh water |
| Paint equipment cleaner | Clean fresh water |
| Pot life | Unlimited |
| Drying Time | Baking temperature, hard dry (min): 130 °C, 30 |
Note: ventilation, temperature, relative humidity and film thickness all affect drying and curing times. The data above are measured under well-ventilated conditions with relative humidity <75%.
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| density | 1.10 kg/L |
All surfaces to be coated shall be clean, dry and free from contamination. For vehicles requiring primer and intermediate coats, steel surfaces shall be blast-cleaned to Sa2.5 or power-tool cleaned to St3. Metal surfaces such as office supplies and packaging drums may be degreased and derusted with special cleaners.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
