F53-33 Iron Oxide Phenolic Anticorrosive Paint is a phenolic paint used as a primer. Suitable for anticorrosion of various machinery and steel structure surfaces. Iron oxide red, composed of phenolic resin, drier, solvent naphtha, etc. Parameters on this page: dry film thickness 30 µm, theoretical spreading rate 12.82 m²/kg.
Parameter source: OSAKA original technical data sheet (TDS) "F53-33 Iron Oxide Phenolic Anticorrosive Paint"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 50% |
|---|---|
| Dry Film Thickness | 30 µm |
| Theoretical Spreading Rate | 12.82 m²/kg |
| VOC | 433 g/L |
| Density / Specific Gravity | Approx. 1.3 kg/L |
| Number of Components | One-component |
| Flash Point | 38°C |
| Thinner | OUP 100, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
Iron oxide red, composed of phenolic resin, drier, solvent naphtha, etc.
Suitable for anticorrosion of various machinery and steel structure surfaces.
| Volume Solids | 50% |
|---|---|
| Dry Film Thickness | 30 µm corresponds to 60 µm wet film thickness |
| Theoretical Spreading Rate | Approx. 12.82 m²/kg, based on 30 µm dry film thickness |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 433 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 100, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 100 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 3 | 36 | 36 h | Unlimited |
| 23°C | 2 | 24 | 24 h | Unlimited |
| 35°C | 1 | 16 | 16 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 25 kg in a 20 L drum |
| Flash Point | 38°C |
| density | Approx. 1.3 kg/L |
Steel surface: blast clean to ISO 8501:2007 Sa2.5 or hand/power tool clean to St3 (before painting)
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
