F04-11 Phenolic Enamel is a phenolic coating used as a topcoat. It is suitable for the protection and decoration of coatings on metal and wood surfaces. Available in various colours, it is formulated from phenolic resin, driers and mineral spirit; the coating provides good adhesion and water resistance, a full gloss finish and dries at room temperature. Parameters on this page: dry film thickness 30 µm, theoretical spreading rate 11.59 m²/kg.
Parameter source: OSAKA manufacturer's Technical Data Sheet (TDS) "F04-11 Phenolic Enamel"; values such as spreading rate are converted from TDS parameters and are for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 40% |
|---|---|
| Dry Film Thickness | 30 µm |
| Theoretical Spreading Rate | 11.59 m²/kg |
| VOC | 519.6 g/L |
| Density / Specific Gravity | Approx. 1.15 kg/L |
| Number of Components | One-component |
| Flash Point | 35°C |
| Thinner | OUP 100, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
Various colours; formulated from phenolic resin, driers and mineral spirit; the coating provides good adhesion and water resistance, a full gloss finish and dries at room temperature.
Suitable for the protection and decoration of coatings on metal and wood surfaces.
| Volume Solids | 40% |
|---|---|
| Dry Film Thickness | 30 µm corresponds to 75 µm WFT |
| Theoretical Spreading Rate | Approx. 11.59 m²/kg, based on 30 µm dry film thickness |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 519.6 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.49 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 100, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 100 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 4 | 48 | 48 h | 7 days |
| 23°C | 2 | 24 | 24 h | 7 days |
| 35°C | 1 | 16 | 16 h | 7 days |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 35°C |
| density | Approx. 1.15 kg/L |
Before application, keep all primed or intermediate-coated steel surfaces clean and dry, and free of oil or grease contamination.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
