A tank coating for carrying chemicals, suitable for carrying various petrochemical products such as gasoline, diesel, kerosene and aviation fuel. Two-pack, white, grey or pink. Parameters on this page: dry film thickness 100 µm, theoretical spreading rate 4.84 m²/kg, number of components: two-component.
Parameter source: OSAKA original technical data sheet (TDS) for EPTANK366 Chemical Tank Coating; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 63% |
|---|---|
| Dry Film Thickness | 100µm |
| Theoretical Spreading Rate | 4.84 m²/kg |
| VOC | 320 g/L |
| Density / Specific Gravity | Approx. 1.3 kg/L |
| Number of Components | Two-component |
| Thinner | OUP 103, recommended addition 3%–5% |
| Mixing Ratio | Component A : Component B = 6:1 (by weight) |
| Pot Life | 5 °C: 5 h; 23 °C: 2.5 h; 35 °C: 1.5 h |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
Two-pack, white, grey or pink.
A tank coating for carrying chemicals, suitable for carrying various petrochemical products such as gasoline, diesel, kerosene and aviation fuel.
| Volume Solids | 63% |
|---|---|
| Dry Film Thickness | 100 µm, equivalent to 158.7 µm wet film thickness |
| Theoretical Spreading Rate | 4.84 m²/kg, based on 100 µm dry film thickness. |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 320 g/L |
| Mixing Ratio | Component A : Component B = 6:1 (by weight) |
|---|---|
| Airless spray | Recommended: tip size 0.53–0.68 mm; fluid pressure ≥ 19 MPa |
| Brush or roller | For small areas only, including touch-up; repeat application is required to achieve the specified film thickness. |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 103, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 103 |
| Pot life | 5 °C: 5 h; 23 °C: 2.5 h; 35 °C: 1.5 h |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 8 | 48 | 36 h | 35 days |
| 23°C | 3 | 24 | 16 h | 28 days |
| 35°C | 1.5 | 16 | 12 h | 14 days |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | Component A: 18 kg in a 20 L container; Component B: 3 kg in a 4 L container |
| Flash Point | Above 23 °C |
| density | Approx. 1.3 kg/L |
Consult the company for detailed information on coating the interior walls of tanks. In accordance with SSPC-SP1, remove grease by solvent cleaning; if necessary, remove weld slag, grind weld seams and sharp edges, and blast clean to white metal (SSPC-SP10 or Sa 2.5 of ISO 8501:2007). Apply the coating before oxidation occurs; if oxidation has occurred, re-blast the oxidised areas to the specified standard. Ensure the surface is clean before application, and apply the next coat within the specified recoating interval. For maintenance matters, consult the company.
Consult the company to confirm that this tank coating is suitable for the cargo to be carried. The drying time and recoating interval of this coating may vary with different on-site factors, such as tank shape and ventilation rate.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
