EPSP410 Water-borne Epoxy Static Conductive Coating belongs to water-borne coatings. Used for the internal walls of tanks storing crude oil and various refined oils as a static conductive anti-corrosive coating; also applicable to other locations requiring static conductivity. Two-component water-borne epoxy static conductive coating, grey or other colours, with metal oxides as the static conductive medium. Parameters on this page: dry film thickness 100 µm, theoretical spreading rate 4.82 m²/kg, number of components two-component.
Parameter source: OSAKA original Technical Data Sheet (TDS) \"EPSP410 Water-borne Epoxy Static Conductive Coating\"; values such as spreading rate are converted from TDS parameters, for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 70% |
|---|---|
| Dry Film Thickness | 100 µm |
| Theoretical Spreading Rate | 4.82 m²/kg |
| VOC | — |
| Density / Specific Gravity | 1.45 kg/L |
| Number of Components | Two-component |
| Thinner | Clean fresh water |
| Mixing Ratio | Component A : Component B = 5:1 (by weight) |
| Pot Life | 23 °C: 4 h |
Two-component water-borne epoxy static conductive coating, grey or other colours, with metal oxides as the static conductive medium.
Used for the internal walls of tanks storing crude oil and various refined oils as a static conductive anti-corrosive coating; also applicable to other locations requiring static conductivity. The coating provides good adhesion, flexibility and impact resistance, good oil resistance and corrosion resistance, and good static conductive performance.
| Volume Solids | 70% |
|---|---|
| Dry Film Thickness | 100 µm corresponds to 140 µm wet film thickness |
| Theoretical Spreading Rate | 4.82 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Mixing Ratio | Component A : Component B = 5:1 (by weight) |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.53–0.68 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Recommended |
| Thinner | Clean fresh water |
| Paint equipment cleaner | Clean fresh water |
| Pot life | 23 °C: 4 h |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 2 | 48 | 48 h | 7 days |
| 23°C | 1 | 24 | 24 h | 7 days |
| 35°C | 0.5 | 16 | 16 h | 7 days |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | Component A: 20 kg in a 20 L container; Component B: 4 kg in a 4 L container |
| density | 1.45 kg/L |
Steel surfaces: abrasive blast clean to Sa 2.5 (ISO 8501:2007) or clean by hand/power tools to St 3.
Recommended number of coats: three coats by high-pressure airless spray, dry film thickness up to 300 µm.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
