EPP309 Epoxy Oil-resistant Paint belongs to Epoxy coatings. Suitable for the anti-corrosion protection of fuel tank equipment such as hydraulic oil, lubricating oil and fuel oil tanks. Two-component, silver or other colours, excellent oil resistance. Parameters on this page: dry film thickness 70 µm equivalent to 127 µm wet film, theoretical spreading rate 6.28 m²/kg, number of components two-component.
Parameter source: OSAKA original technical data sheet (TDS) “EPP309 Epoxy Oil-resistant Paint”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 55% |
|---|---|
| Dry Film Thickness | 70 µm corresponds to 127 µm WFT |
| Theoretical Spreading Rate | 6.28 m²/kg |
| VOC | 387 g/L |
| Density / Specific Gravity | Approx. 1.25 kg/L |
| Number of Components | Two-component |
| Thinner | OUP 103, recommended addition 3%–5% |
| Mixing Ratio | Component A : Component B = 5:1 (by weight) |
| Pot Life | 23 °C: 6 h |
Two-component, silver-pink or other colours, excellent oil resistance.
Suitable for anti-corrosion protection of fuel tank equipment such as hydraulic oil, lubricating oil and fuel oil tanks.
| Volume Solids | 55% |
|---|---|
| Dry Film Thickness | 70 µm corresponds to 127 µm WFT |
| Theoretical Spreading Rate | 6.28 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 387 g/L |
| Mixing Ratio | Component A : Component B = 5:1 (by weight) |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 103, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 103 |
| Pot life | 23 °C: 6 h |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 3 | 48 | 48 h | Unlimited |
| 23°C | 1 | 24 | 24 h | Unlimited |
| 35°C | 0.5 | 12 | 12 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | Component A: 20 kg in a 20 L container; Component B: 4 kg in a 4 L container |
| Flash Point | Above 23 °C |
| density | Approx. 1.25 kg/L |
Steel surfaces: blast clean to Sa2.5 of ISO 8501:2007, or clean by hand or power tool to St3.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
