EPE315 Modified Epoxy Ester Intermediate Coat is an epoxy coating used as an intermediate coat. It is compatible with most shop primers and primers. One-component packaging, in iron red or grey. Parameters on this page: volume solids 58.5%, dry film thickness 50 µm equivalent to 85.5 µm wet film, theoretical spreading rate 8.6 m²/kg.
Parameter source: OSAKA original technical data sheet (TDS) for EPE315 Modified Epoxy Ester Intermediate Coat; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 58.5% |
|---|---|
| Dry Film Thickness | 50 µm corresponds to 85.5 µm WFT |
| Theoretical Spreading Rate | 8.6 m²/kg |
| VOC | 357 g/L |
| Density / Specific Gravity | Approx. 1.36 kg/L |
| Number of Components | One-component |
| Flash Point | 30°C |
| Thinner | OUP 103, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
One-component packaging, iron red or grey
Compatible with most shop primers and primers.
| Volume Solids | 58.5% |
|---|---|
| Dry Film Thickness | 50 µm corresponds to 85.5 µm WFT |
| Theoretical Spreading Rate | 8.6 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 357 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 103, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 103 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 60 | 48 | 48 h | Unlimited |
| 23°C | 15 | 24 | 24 h | Unlimited |
| 35°C | 10 | 12 | 12 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 25 kg in a 20 L container |
| Flash Point | 30°C |
| density | Approx. 1.36 kg/L |
Primed surfaces shall be kept clean and dry and free from contamination.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
