CR106 Chlorinated Rubber Primer is a chlorinated rubber coating used as a primer. Used for corrosion protection of steel structures and concrete exposed to moderate atmospheric corrosive environments, with excellent water resistance and chemical resistance. One-component, iron red or grey, fast-drying, can be applied at low temperatures. Parameters on this page: volume solids 46.3%, dry film thickness 35 µm equivalent to 75.6 µm wet film, theoretical spreading rate 10.1 m²/kg.
Parameter source: OSAKA original technical data sheet (TDS) for CR106 Chlorinated Rubber Primer; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 46.3% |
|---|---|
| Dry Film Thickness | 35 µm corresponds to 75.6 µm WFT |
| Theoretical Spreading Rate | 10.1 m²/kg |
| VOC | 465 g/L |
| Density / Specific Gravity | Approx. 1.3 kg/L |
| Number of Components | One-component |
| Thinner | OUP 101, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
| Pot Life | Unlimited |
One-component, iron red or grey, fast-drying, can be applied at low temperatures.
For corrosion protection of steel and concrete exposed to medium atmospheric corrosion, with high water and chemical resistance.
| Volume Solids | 46.3% |
|---|---|
| Dry Film Thickness | 35 µm corresponds to 75.6 µm WFT |
| Theoretical Spreading Rate | 10.1 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 465 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥17.6 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 101, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 101 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 40 | 16 | 16 h | 7 days |
| 23°C | 20 | 5 | 5 h | 7 days |
| 35°C | 10 | 2 | 2 h | 7 days |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 25 kg in a 20 L container |
| Flash Point | Above 23 °C |
| density | Approx. 1.3 kg/L |
Before application, blast clean to Sa 2.5 of ISO 8501:2007, or prepare to St 3 by hand or power tool.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
