CPR003 Acrylic Rubber Topcoat is an acrylic coating used as a topcoat. Suitable for surface protection of outdoor mining machinery, lifting machinery, container equipment and various outdoor structures. A one-component acrylic rubber topcoat, high-gloss or semi-gloss, in multiple colours. Parameters on this page: dry film thickness 50-90 µm, theoretical spreading rate 6.96 m²/kg, number of components: one-component.
Parameter source: OSAKA original technical data sheet (TDS) for CPR003 Acrylic Rubber Topcoat; spreading rate and other values are converted from TDS parameters and provided for product selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 48% |
|---|---|
| Dry Film Thickness | 50–90 µm |
| Theoretical Spreading Rate | 6.96 m²/kg |
| VOC | 453.3 g/L |
| Density / Specific Gravity | Approx. 1.15 kg/L |
| Number of Components | One-component |
| Flash Point | 38°C |
| Thinner | OUP 108, recommended addition 3%~5% |
| Mixing Ratio | Single pack |
A one-component acrylic rubber topcoat, high-gloss or semi-gloss, in multiple colours. Fast drying and curing, short handling period, good outdoor weather resistance.
Suitable for the surface protection of outdoor mining machinery, hoisting machinery, container equipment and various outdoor buildings.
| Volume Solids | 48% |
|---|---|
| Dry Film Thickness | 50–90 µm |
| Theoretical Spreading Rate | 6.96 m²/kg (based on 60 µm dry film) |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 453.3 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.49 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 108, recommended addition 3%~5%. |
| Paint equipment cleaner | OUP 108 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (min) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 30 | 16 | 12 h | Unlimited |
| 23°C | 15 | 12 | 6 h | Unlimited |
| 35°C | 10 | 9 | 3 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 38°C |
| density | Approx. 1.15 kg/L |
All primed or intermediate-coated surfaces shall be kept clean, dry and free from contamination; before application, surface assessment and treatment shall be carried out per ISO 8501:2007.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
