AL063 Alkyd Enamel belongs to alkyd coatings and is used as a topcoat. Suitable for the protection and decoration of outdoor metal and wood surfaces, such as hulls, superstructures, flagpoles, railings, chimney exteriors, cabin interiors, lifeboats and port machinery, with good levelling, ease of brush application and good weather resistance. One-component, high gloss, various colours, containing special weather-resistant resins and pigments. Parameters on this page: volume solids 53.5%, dry film thickness 50 µm, theoretical spreading rate 8.91 m²/kg.
Parameter source: OSAKA original technical data sheet (TDS) “AL063 Alkyd Enamel”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 53.5% |
|---|---|
| Dry Film Thickness | 50 µm |
| Theoretical Spreading Rate | 8.91 m²/kg |
| VOC | 400 g/L |
| Density / Specific Gravity | Approx. 1.20 kg/L |
| Number of Components | One-component |
| Flash Point | 35°C |
| Thinner | OUP 100, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
One-component, high gloss, various colours, containing special weather-resistant resins and pigments.
Suitable for the protection and decoration of outdoor metal and wood surfaces, such as hulls, superstructures, flagpoles, railings, chimney exteriors, cabin interiors, lifeboats and port machinery, with good levelling, ease of brush application and good weather resistance.
| Volume Solids | 53.5% |
|---|---|
| Dry Film Thickness | 50 µm |
| Theoretical Spreading Rate | 8.91 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 400 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.49 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 100, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 100 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 3 | 36 | 36 h | Unlimited |
| 23°C | 2 | 24 | 24 h | Unlimited |
| 35°C | 1 | 12 | 12 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 35°C |
| density | Approx. 1.20 kg/L |
Before application, keep all primed or intermediate-coated steel surfaces clean and dry, and free of oil or grease contamination.
Recommended number of coats: one coat by high-pressure airless spray, dry film thickness 50 µm. Compatible previous coat: alkyd anticorrosive primer.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
