AL055 Alkyd Ready Mixed Paint belongs to alkyd paints. Suitable for anti-corrosion protection of steel structures under C2–C4 atmospheric corrosion environments; convenient application. One-component, silver pink or other colours, oxidative drying type, air-drying at ambient temperature. Parameters on this page: dry film thickness 50 µm equivalent to wet film of 94.3 µm, theoretical spreading rate 9.13 m²/kg, number of components one-component.
Parameter source: OSAKA original technical data sheet (TDS) “AL055 Alkyd Ready Mixed Paint”; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 53% |
|---|---|
| Dry Film Thickness | 50 µm corresponds to 94.3 µm WFT |
| Theoretical Spreading Rate | 9.13 m²/kg |
| VOC | 407 g/L |
| Density / Specific Gravity | Approx. 1.16 kg/L |
| Number of Components | One-component |
| Flash Point | 38°C |
| Thinner | OUP 100, recommended addition 3%–5% |
| Mixing Ratio | Single pack |
One-component, silver pink or other colours, oxidative drying type, air-drying at ambient temperature.
Suitable for corrosion protection of steel structures in C2–C4 atmospheric corrosion environments, easy to apply.
| Volume Solids | 53% |
|---|---|
| Dry Film Thickness | 50 µm corresponds to 94.3 µm WFT |
| Theoretical Spreading Rate | 9.13 m²/kg |
| Practical Spreading Rate | Allowing a suitable loss |
| Volatile organic compound content | 407 g/L |
| Mixing Ratio | Single pack |
|---|---|
| Airless spray | Recommended: nozzle tip size 0.43–0.53 mm; fluid pressure ≥15.5 MPa |
| Brush or roller | Recommended |
| Conventional spray | Suitable but not recommended. |
| Thinner | OUP 100, recommended addition 3%–5%. |
| Paint equipment cleaner | OUP 100 |
| Pot life | Unlimited |
| Drying Time | ||||
| Substrate Temperature | Touch dry (h) | Hard dry (h) | Recoat Interval | |
| Minimum | Maximum | |||
| 5°C | 3 | 36 | 36 h | Unlimited |
| 23°C | 2 | 24 | 24 h | Unlimited |
| 35°C | 1 | 12 | 12 h | Unlimited |
| Storage | Store in a cool, dry environment |
|---|---|
| Shelf life | 1 year |
| Packaging Specifications | 20 kg in a 20 L container |
| Flash Point | 38°C |
| density | Approx. 1.16 kg/L |
Before application, keep all primed or intermediate-coated steel surfaces clean and dry, and free of oil or grease contamination.
Shall not be overcoated with epoxy or polyurethane coatings.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
