Used as an anti-corrosive paint on exposed decks, exterior superstructures, outfittings and other areas of ships. The product has excellent film-forming properties and can be applied as a thick film; its adhesion, corrosion resistance and moisture resistance are excellent. Parameters on this page: volume solids 45 ± 2%, theoretical spreading rate 5.63 m²/L (dry film 75 µm).
Parameter source: Nippon Paint Marine original technical data sheet (TDS) “UNIPRIME 20 Multi-purpose Primer 20”; values such as spreading rate are converted from TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 45 ± 2% |
|---|---|
| Dry Film Thickness | 30µm ~ 80µm |
| Theoretical Spreading Rate | 5.63 m²/L (dry film 75 µm) |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 30°C |
| Thinner | THINNER 200 (0–5%, by weight) |
| Colour / Appearance | Brown — CDA217, light grey — CDA627, white — CDA095 |
The manufacturer's datasheet for this model does not state the coating position or resin type, so it has not been assigned to the above categories. Browse similar products by category, orContact Usconfirm the coating system.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
Special synthetic resin primer for exterior surfaces of weather decks and superstructures. As it contains no aluminium, it can also be used for anti-corrosive protection of superstructure and deck areas on tankers. The product has excellent film-forming properties and can be applied at high film build; the product shows excellent adhesion, corrosion resistance and moisture resistance. It can also be overcoated with various topcoats (alkyd, acrylic, polyurethane and other types).
Used as an anti-rust paint for exposed decks, exterior superstructures, outfitting and other areas of ships
| Type | Special synthetic resin |
|---|---|
| Colour | Brown — CDA217, light grey — CDA627, white — CDA095 |
| Gloss | Flat |
| Solids content (by volume) | 45 ± 2% (ISO3233:1998) |
| Recommended film thickness | DFT: 30–80 µm |
| Wet film | 67µm ~ 178µm |
| Theoretical Spreading Rate | 5.63 m²/L (dry film 75 µm) |
| Thinner | THINNER 200 (0–5%, by weight) |
| 5°C | 20°C | 30°C | ||
| Drying Time | Surface Dry | 1 h | 30 min | 20 min |
| Hard Dry | 4 h | 2 h | 1.33 h | |
| Recoat interval | Minimum | 8 h | 4 h | 2 h |
| (self-recoat) | Maximum | ----- | ----- |
| Flash Point | 30°C |
|---|
Airless spray gun tip size: 0.53 ~ 0.59 mm
| Spray fan angle | 55 ~ 69° |
|---|---|
| Output pressure | 100 ~ 150 kg/㎝2 |
| Brush/roller | For small-area repair only |
Blast clean to Sa2.5 or power tool clean to St3.0
| Packaging Specifications | 20 L |
|---|
Take the necessary protective measures to avoid skin and eye contact (e.g. gloves, safety glasses, face
1) The content of this data sheet may be revised at any time as experience grows and the product develops. 2) Store the product in a paint warehouse.
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
