NOA PC antifouling belongs to antifouling coatings. The 1st Buff colour features Self Indicating (SI) technology, which lets a painter visually judge whether the correct film thickness (wet/dry) has been achieved during application. Parameters on this page: volume solids 65 ± 2%, dry film thickness 125-300 µm, theoretical spreading rate 5.20 m²/L.
Data source: nippon-marin original Technical Data Sheet (TDS), "NOA PC Antifouling Paint"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 65 ± 2% |
|---|---|
| Dry Film Thickness | 125-300 µm |
| Theoretical Spreading Rate | 5.20 m²/L (125 µm) |
| VOC | 321 g / L as supplied |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | NIPPON MARINE THINNER 600 / NIPPON … |
| Mixing Ratio | BASE 3.57 / HARDENER 1 |
| Colour / Appearance | 1st coat : Buff |
| A two-pack pure epoxy designed for petroleum and chemical product tanks. | It offers superior resistance to petroleum products, solvents, water and chemical attack. |
|---|
1st Buff color is characterized by Self Indicating (SI) technology, which enables a painter to visually judge if the correct film thickness (wet / dry) has been achieved during the application process and
| after the completion of painting. | Two coat system with SI paint (1st coat) plus non-SI paint (2nd coat) is recommended. |
|---|
Product Carriers, Tanks for petroleum products
| Type | Pure epoxy (Two-pack) |
|---|---|
| Color | 1st coat : Buff |
| 2nd coat | Gray (Non-SI) |
| Gloss | Semi-gloss |
| Volume Solids | 65 ± 2% (ISO3233:1998) |
| Dry Film Thickness | 125 ~ 300 µm |
| Approx. Wet Film Thickness | 192 ~ 462 µm |
| Theoretical Coverage | 5.20 m² / L (125 µm) |
| Drying Time | Surface Dry | 31/2 hours(5°C) | 11/2 hours(20°C) | 40 minutes (30°C) |
| Dry Hard | 36 hours (5°C) | 16 hours (20°C) | 10 hours (30°C) | |
| Interval before Overcoating | Min. | 36 hours (5°C) | 16 hours (20°C) | 10 hours (30°C) |
| ( by self ) | Max. | 10 days (5°C) | 7 days (20°C) | 5 days (30°C) |
| VOC Values | 321 g / L as supplied |
|---|---|
| Thinner | NIPPON MARINE THINNER 600 / NIPPON MARINE THINNER 615 (China Regions) |
Airless Spray
| Tip range | 0.48 ~ 0.53 mm |
|---|---|
| Fan angle | 45 ~ 60° |
| ( T/U ) | 30° Output pressure 150 ~ 200 kg / cm² |
| Brush | For touching up small areas only |
| Mixing Ratio by Volume | BASE 3.57 / HARDENER 1 |
| Pot Life after Mixing | 5 hours (5°C) |
| 3 hours (20°C) | 21/2 hours (30°C) |
| Packaging | Two Packs Package may vary from country to country. |
| Japan Local Brand | NIPPE EPOXY PC NOA |
| Flash Point | BASE 34 °C, HARDENER 25 °C |
Blast cleaned to ISO-Sa 21/2
is recommended.
Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Proper ventilation and protective measures must be provided during applications and drying period to keep solvent vapor concentrations within safe limits.
Prior to use, obtain, consult and follow the SDS for this product concerning health and safety information.
1)The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.
2)Apply this paint immediately after sandblasting. Before painting, the areas where corroded, welded and burnt should be carefully treated with sandblasting,shotblasting,or a disc sander or a power brush.
3)If half-dried painted surface is subjected to rain or dew, blooming or sweating may occur, with the surface turned to white. Rub the area lightly with a wire brush before painting.
4)For the applications, refer to our "Suitability Table of Cargoes for Loading" and "Application Manual of NOA PC System".
5) For availability of product consult Nippon Paint Marine representatives.
6) Unit size and filled volumes can vary due to local regulations.
7) Store the paints in paint store.
8) Use products that comply with local regulations to clean the paint equipment.
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
