NIPPON O-MARINE FINISH Alkyd Topcoat is a topcoat. Used as a topcoat for open decks, superstructure interiors and exteriors, etc. A topcoat for decks and superstructure interiors and exteriors, made of weather-resistant alkyd resin, with good application properties. Parameters on this page: volume solids 46 ± 2%, theoretical spreading rate 13.14 m²/L (dry film 35 µm).
Data source: NIPPON MARINE original Technical Data Sheet (TDS), "NIPPON O-MARINE FINISH Alkyd Topcoat"; spreading rate and other values are converted from the TDS parameters, for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 46 ± 2% |
|---|---|
| Dry Film Thickness | 30µm ~ 40µm |
| Theoretical Spreading Rate | 13.14 m²/L (dry film 35 µm) |
| VOC | — |
| Density / Specific Gravity | — |
| Number of Components | — |
| Flash Point | 36°C |
| Thinner | THINNER 100 (0–5%, by weight) |
| Colour / Appearance | White (H)000 – FAE095, Black (H)999 – FAH01… |
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
A topcoat for decks and superstructure interiors and exteriors, made of weather-resistant alkyd resin, with good application properties.
Used as a topcoat for open decks, superstructure interiors and exteriors, etc.
| Type | Alkyd |
|---|---|
| Colour | White (H)000 – FAE095, Black (H)999 – FAH010. Grey (H)060 – FAE060, Light grey (H)070 – FAH070. Dark grey (H)040 – FAH040. Green (H)442 – FAH442, Green (H)225 – FAH225. Cream (H)332 – FAH332, Cream (H)335 – FAH335. Red-brown (H)445 – FAH445. Red (H)537 – FAH537. Orange (H)592 – FAH592. For other colours, see Note 3) |
| Gloss | |
| Solids content (by volume) | 46 ± 2% (ISO3233:1998) |
| Recommended film thickness | Dry film: 30–40 µm |
| Wet film | 65µm ~ 87µm |
| Theoretical Spreading Rate | 13.14 m²/L (dry film 35 µm) |
| Thinner | THINNER 100 (0–5%, by weight) |
| 5°C | 20°C | 30°C | ||
| Drying Time | Surface Dry | 1 h | 30 min | 20 min |
| Hard Dry | 14 h | 7 h | 5 h | |
| Recoat interval | Minimum | 30 h | 15 h | 10 h |
| (self-recoat) | Maximum | ----- | ----- |
| Flash Point | 36°C |
|---|
Airless spray nozzle size: 0.43–0.48 mm
| Spray fan angle | 45 ~ 69° |
|---|---|
| Output pressure | 100 ~ 150 kg/㎝2 |
| Brush/roller | For small-area repair only |
All surfaces to be coated must be clean, dry and free of contaminants. Wash with high-pressure fresh water to remove all oil, grease, soluble salts and foreign matter
| Packaging Specifications | 20 L, 5 L |
|---|
Take the necessary protective measures to avoid contact with skin and eyes (e.g. gloves, goggles, face masks). Ensure adequate ventilation during application and drying, keeping the solvent vapour concentration within safe limits.
Before use, refer to the health and safety information in the Material Safety Data Sheet (MSDS) for this product.
1) The contents of this product data sheet may be changed at any time as our experience grows and the product is further developed. 2) Anti-slip sand can be added to produce anti-slip effect on deck and walkway surfaces.
3) The following colours are our standard colour numbers:
| Grey | 065, 060; cream: 332, 335; green: 442, 505, 535, 225. 4) Store this product in a paint warehouse |
|---|
Information is subject to the manufacturer's latest version; the manufacturer's latest TDS prevails.
The technical parameters on this page are taken from the product's original manufacturer technical datasheet, the copyright of which belongs to the manufacturer. If a rights holder considers the presentation inappropriate, contact us for verification and handling.
Packaging specifications and batch lead times are subject to actual availability. PleaseContact Uscontact us for project-based calculation.
