NIPPON E-MARINE MAX epoxy coating belongs to epoxy coatings, depending on dry film thickness (DFT) requirement and application area. Parameters on this page: volume solids 58 ± 2%, dry film thickness 75-100 µm, theoretical spreading rate 7.73 m²/L.
Parameter source: nippon-marin original technical data sheet (TDS) \"NIPPON E-MARINE MAX Epoxy Paint\"; values such as spreading rate are converted from TDS parameters and are for selection reference only.
The above content is compiled from the manufacturer's datasheet and this site's parameter tables. For selection, coating systems and lead times, pleaseContact Usfor confirmation.
This page carries the full TDS for this product, translated from the manufacturer's original document. No file download is needed; for an original-language copy, send an enquiry.
| Volume Solids | 58 ± 2% |
|---|---|
| Dry Film Thickness | 75-100 µm |
| Theoretical Spreading Rate | 7.73 m²/L (75 µm) |
| VOC | 470 g / L as supplied |
| Density / Specific Gravity | — |
| Number of Components | Two-component |
| Thinner | NIPPON MARINE THINNER 615 |
| Mixing Ratio | BASE 5.5 / HARDENER 1 |
| Colour / Appearance | 445 Red oxide, 060 Gray, 442 Green,… |
A flexible, surface-tolerant epoxy paint that is used for general onboard maintenance, touch up and repair work on exposed decks, exterior of superstructure, topsides, hatch covers, cargo holds and etc.
E-MARINE MAX provides both anticorrosive properties and a finish. It can be used as a primer and finish coat or as a single coat system; depending on dry film thickness (DFT) requirement and application area.
Easy application with a brush or roller.
Anticorrosive for decks, holds, superstructures, etc.
| Type | Epoxy (Abrasion resistant / High build)(Two-pack) |
|---|---|
| Color | 445 Red oxide, 060 Gray, 442 Green, 000 White |
| Gloss | Flat |
| Volume Solids | 58 ± 2% (ISO3233:1998) |
| Typical Dry Film Thickness | 75 ~ 100 µm |
| Approx. Wet Film Thickness | 134 ~ 179 µm |
| Theoretical Coverage | 7.73 m²/ L (75 µm) |
(5°C) 2.5 hours (20°C)
| Drying Time | Surface Dry | 6 hours | 40 minutes (30°C) | |
| Dry Hard | 8 hours (5°C) | 4 hours (20°C) | 2 hours (30°C) | |
| Interval before Overcoating | Min. | 12 hours (5°C) | 5 hours (20°C) | 3 hours (30°C) |
| ( by self ) | Max. | 30 days (5°C) | 30 days (20°C) | 30 days (30°C) |
| VOC Values | 470 g / L as supplied |
|---|---|
| Thinner | NIPPON MARINE THINNER 615 |
Brush / Roller Suitable
| Airless Spray | Applicable |
|---|---|
| Tip range | 0.48 mm |
| Fan angle | 55 ~ 62° |
| Output pressure | 100 ~ 150 kg / cm² |
| Mixing Ratio by Volume | BASE 5.5 / HARDENER 1 |
| Pot Life after Mixing | 5 hours (5°C) 3 hours (20°C) 1.5 hour (30°C) |
| Package | Two Packs - 16L (BASE 13.5L, HARDENER 2.5L) |
| Flash Point | BASE 22 °C, HARDENER 25 °C |
All surfaces to be coated should be clean, dry and free from contamination.
High pressure fresh water wash and remove all oil / grease, soluble contaminants and other foreign matters.
Take precautions to avoid skin and eye contact (i.e. gloves, goggles, face masks, barrier creams etc.) Proper ventilation and protective measures must be provided during applications and drying period to keep solvent vapor concentrations within safe limits.
Prior to use, obtain, consult and follow the SDS for this product concerning health and safety information.
| 1) | The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development. |
|---|---|
| 2) | At temperatures below 5°C, the coating will take longer to dry and harden. |
| 3) | For availability of product consult Nippon Paint Marine representatives. |
| 4) | Unit size and filled volumes can vary due to local regulations. |
| 5) | Store the paints in paint store. |
| 6) | Some regions will be supplied with NIPPON MARINE THINNER 600 instead of NIPPON MARINE THINNER 615. |
| 7) | Use products that comply with local regulations to clean the paint equipment. |
| 8) | The Application Guide offers product details and recommended practices for the use of the product. |
| 9) | Refer to Nippon Paint Marine Global Colour Cards and contact local Nippon Paint Marine representative for colour availability & customisation. |
Data is subject to the manufacturer's latest version; in all cases the manufacturer's latest TDS prevails.
For more Q&A on selection, application, acceptance and defect diagnosis, seeFAQsection.
